BS ISO 3467:2016规定了莫氏锥度销铰刀的尺寸 锥形柄。它只涵盖公制尺寸，这是未来这些设备的唯一建议尺寸 铰刀的类型。铰刀设计用于为按照ISO 2339制造的锥形销制造孔，范围在 标称直径为5 mm至50 mm。除非另有说明，否则这些铰刀将采用右手切削。凹槽可以是直的或左旋螺旋的，由制造商选择。ISO 3465中介绍了手动锥形销铰刀，以及机加工直柄锥形销铰刀 在ISO 3466中。交叉引用:ISO 286ISO 296ISO 2339ISO 3465ISO 3466ISO/TS 13399-3:2014购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS ISO 3467:2016 lays down the dimensions of machine taper pin reamers with Morse taper shanks.It covers only metric dimensions, which are the only recommended dimensions in the future for these types of reamers.The reamers have been designed to produce holes for taper pins manufactured to ISO 2339, in the range 5 mm to 50 mm nominal diameter.Unless otherwise stated, these reamers will be right-hand cutting.The flutes may be straight or left-hand spiral, at the option of the manufacturer.Hand taper pin reamers are dealt with in ISO 3465, and machine taper pin reamers with parallel shanks in ISO 3466.Cross References:ISO 286ISO 296ISO 2339ISO 3465ISO 3466ISO/TS 13399-3:2014All current amendments available at time of purchase are included with the purchase of this document.