现行

GB/T 12709-1991

润滑油老化特性测定法 （康氏残炭法）
Lubricating oils--Determination of aging characteristics--Conradson carbon residue method

1991-01-28

现行

GOST ISO 6617-2013

Масла смазочные нефтяные. Характеристики старения. Определение изменения содержания коксового остатка по Конрадсону после окисления
石油润滑油 老化特征氧化后康拉多森碳残留变化的测定

2013-06-07

现行

ISO 6617-1994

Petroleum-based lubricating oils — Aging characteristics — Determination of change in Conradson carbon residue after oxidation
石油基润滑油——老化特性——氧化后Conradson残炭变化的测定

1994-10-13

现行

KS M ISO 6247

석유 제품－윤활유의 기포성 시험방법
测试产品 - 测定润滑油的泡沫特性

2017-12-27

现行

KS M ISO 6247(2022 Confirm)

석유 제품－윤활유의 기포성 시험방법
试验产品－润滑油起泡特性的测定

2017-12-27

现行

DIN 51350-5

Testing of lubricants - Testing in the four-ball tester - Part 5: Determination of wearing characteristics for consistent lubricants
润滑剂的试验.在四球试验机中的试验.第5部分:一致性润滑剂磨损特性的测定

2015-03-01

现行

DIN 51360-1

Testing of cooling lubricants; determination of corrosion preventing characteristics of cooling lubricants mixed with water; Herbert corrosion test
冷却润滑剂的测试；测定与水混合的冷却润滑剂的防腐蚀特性；赫伯特腐蚀试验

1985-08-01

现行

ASTM D1264-18e1

Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
确定润滑脂润滑特性的标准试验方法

2018-09-01

现行

DIN ISO 6617

Petroleum-based lubricating oils - Aging characteristics - Determination of change in Conradson carbon residue after oxidation (ISO 6617:1994)
石油基润滑油老化特性氧化后康拉德森残炭变化的测定

2011-04-01

现行

BS 2000-146-2000

Methods of test for petroleum and its products-Determination of foaming characteristics of lubricating oils
石油及其产品的试验方法 润滑油泡沫特性的测定

2002-06-18

现行

BS 2000-220-1998

Methods of test for petroleum and its products-Petroleum products and lubricants. Determination of rust-prevention characteristics of lubricating greases
石油及其产品的试验方法 石油产品和润滑剂 润滑脂防锈特性的测定

2000-02-15

现行

DIN 51360-2

Testing of cooling lubricants; determination of corrosion preventing characteristics of cooling lubricants mixed with water; chip/filter paper method
冷却润滑剂的测试；测定与水混合的冷却润滑剂的防腐蚀特性；芯片/滤纸法

1981-07-01

现行

ISO 11007-1-2021/Amd 1-2023

Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating greases — Part 1: Dynamic wet conditions — Amendment 1: Test bearings
石油产品和润滑剂.润滑脂防锈特性的测定.第1部分:动态潮湿条件.修改件1:试验轴承

2023-05-09

现行

ASTM C1581/C1581M-24

Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
测定砂浆和混凝土在约束收缩下的开裂年龄和诱导拉伸应力特性的标准试验方法

2024-07-01

现行

BS 2000-48-2011

Methods of test for petroleum and its products-Determination of oxidation characteristics of lubricating oil (Identical with IP 48/11)
石油及其产品的试验方法

2011-07-31

现行

BS 2000-19-2011

Methods of test for petroleum and its products-Determination of demulsibility characteristics of lubricating oil (Identical with IP 19/11)
石油及其产品的试验方法

2011-07-31

现行

ISO 6301-2-2018

Pneumatic fluid power — Compressed-air lubricators — Part 2: Test methods to determine the main characteristics to be included in supplier's literature
气压传动.压缩空气润滑器.第2部分:确定供应商apos中包括的主要特性的试验方法；中国文学

2018-12-12

现行

JIS B 8378-2-2009

Pneumatic fluid power -- Compressed-air lubricators -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature
气压传动压缩空气润滑器第2部分:确定供应商文献中主要特性的试验方法

2009-01-01