Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 100: Heat-shrinkable moulded shape dimensions
热收缩模制形状 - 第3部分:规格要求形状尺寸 材料要求和相容性能 - 第100页:热收缩模制外形尺寸

2010-06-16

BS EN 62329-3-100. Heat shrinkable moulded shapes. Part 3. Specifications requirements for shape dimensions, material requirements and compatability performance. Sheet 100. Heat-shrinkable moulded shape dimensions
英国标准EN 62329-3-100 热收缩成型的形状 第三部分 形状尺寸、材料要求和相容性性能的规范要求 第100页 热收缩成型尺寸

2008-01-24

Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications
热收缩中低压成型形状 - 第3部分:单个材料的规范 - 第101页:用于低电压应用的热收缩聚烯烃模压形状

2018-01-10

열수축 저전압 및 중전압용 몰드 성형품 — 제3부: 개별 재료에 대한 규격 — 제101절: 저전압용 열수축, 폴리올레핀 몰드 성형품
低压和中压热收缩模塑型材第3部分:单项材料规范活页101:低压用热收缩聚烯烃模塑型材

2023-10-20

Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications
热收缩低压和中压模压型材第3部分:单项材料规范活页103:中压应用的热收缩聚烯烃导电模压型材

2019-05-14

열수축 저전압 및 중전압용 몰드 성형품 — 제3부: 개별 재료에 대한 규격 — 제103절: 중전압용 열수축, 폴리올레핀, 전도성 몰드 성형품
低压和中压热收缩模塑型材第3部分:单项材料规范活页103:中压用热收缩聚烯烃导电模塑型材

2023-10-20

Draft Document - Heat shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance (IEC 15/406/CD:2008)
文件草稿.热收缩模制型材.第3部分:型材尺寸、材料要求和兼容性性能的规范要求.活页102:热收缩弹性模制型材、半刚性、材料要求和系统性能（IEC 15/406/CD:2008）

2008-04-01

Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 102: Heat-shrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applications
热收缩中低压成型形状 - 第3部分:单个材料的规范 - 第102页:中等电压应用的热收缩聚烯烃 抗跟踪模制形状

2018-01-10

열수축 저전압 및 중전압용 몰드 성형품 — 제3부: 개별 재료에 대한 규격 — 제102절: 중전압용 열수축, 폴리올레핀, 내트래킹 몰드 성형품
低压和中压热收缩模塑型材第3部分:单项材料规范活页102:中压用热收缩聚烯烃防跟踪模塑型材

2023-10-20

Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance
热收缩模制形状 - 第3部分:形状尺寸 材料要求和相容性能规范要求 - 第102页 - 热收缩弹性模制形状 半刚性 材料要求和系统性能

2010-06-16

Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 100: Heat-shrinkable moulded shape dimensions (IEC 62329-3-100:2010); German version EN 62329-3-100:2010
热收缩模制形状.第3部分:形状尺寸、材料要求和兼容性性能的规范要求.活页100:热收缩模制形状尺寸（IEC 62329-3-100-2010）；德文版EN 62329-3-100:2010

2011-03-01

Draft Document - Heat shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system performance (IEC 15/405/CD:2008)
文件草稿.热收缩模制型材.第3部分:型材尺寸、材料要求和兼容性性能的规范要求.活页101:热收缩模制型材、聚烯烃、半刚性、有限火灾危险、材料要求和系统性能（IEC 1

2008-05-01

BS EN 62329-3-102. Heat shrinkable moulded shapes. Part 3. Specification requirements for shape dimensions, Material requirements and compatability performance. Sheet 102. Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance
英国标准EN 62329-3-102 热收缩成型的形状 第三部分 形状尺寸、材料要求和兼容性性能的规范要求 第102页 半刚性热收缩弹性模制型材、材料要求和系统性能

2008-01-23

Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system performance
热收缩模制形状 - 第3部分:形状尺寸 材料要求和相容性能规范要求 - 第101页:热收缩模制形状 聚烯烃 半刚性 有限的火灾危险 材料要求和系统性能

2010-06-16

IEC 62329-3-101. Heat shrinkable moulded shapes. Part 3. Specification requirements for shape dimensions, material requirements and compatibility performance. Sheet 101. Heat shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system performance
IEC 62329-3-101 热收缩成型的形状 第三部分 形状尺寸、材料要求和兼容性性能的规范要求 第101页 热收缩模制型材、聚烯烃、半刚性、有限火灾危险、材料要求和系统性能

2008-01-24

BS IEC 62329-3-101. Heat shrinkable moulded shapes. Part 3. Specification requirements for shape dimensions, material requirements and compatibility performance. Sheet 101. Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system performance
BS IEC 62329-3-101 热收缩成型的形状 第三部分 形状尺寸、材料要求和兼容性性能的规范要求 第101页 热收缩模制型材、聚烯烃、半刚性、有限火灾危险、材料要求和系统性能

2008-01-23

BS EN 62329-3-100. Heat shrinkable shapes. Part 3. Specifications requirements for shape dimensions, material requirements and compatibility performance. Sheet 100-107. Heat-shrinkable moulded shape material types. Type A through Type H
英国标准EN 62329-3-100 热收缩形状 第三部分 形状尺寸、材料要求和兼容性性能的规范要求 第100-107页 热收缩成型材料类型 A型到H型

2007-01-31

Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications (IEC 62677-3-101:2018); German version EN IEC 62677-3-101:2018
热收缩低压和中压模制型材.第3部分:单项材料规范.活页101:低压应用的热收缩聚烯烃模制型材（IEC 62677-3-101-2018）；德文版EN IEC 62677-3-101:2018

2018-08-01

Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance (IEC 62329-3-102:2010); German version EN 62329-3-102:2010
热收缩模制型材.第3部分:型材尺寸、材料要求和兼容性性能的规范要求.活页102:半刚性热收缩弹性模制型材、材料要求和系统性能（IEC 62329-3-102-2010）；德语版EN 62

2011-05-01

Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications (IEC 62677-3-103:2019); German version EN IEC 62677-3-103:2019
热收缩低压和中压模制型材.第3部分:单项材料规范.活页103:中压应用的热收缩聚烯烃导电模制型材（IEC 62677-3-103-2019）；德文版EN IEC 62677-3-103:2019

2020-06-01