首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 SMPTE 206-1998(Archived 2004)
到馆提醒
收藏跟踪
购买正版
Motion-Picture Equipment (8-mm Type S) - Model 1 Sound Camera Cartridge - Aperture, Profile, Film Position, Pressure Pad and Flatness (200-Ft Capacity) 电影设备(8-mm S型).型号1声音照相机墨盒.孔径 轮廓 胶片位置 压力垫和平整度(200英尺容量)
发布日期: 1998-01-01
本标准规定了墨盒孔径、压力垫的尺寸和位置,以及在200英尺(60米)容量的8毫米S型I型声电影胶片相机墨盒的相机孔径中,其适当的平整度、间隙和胶片位置所需的特性。
This standard specifies the dimensions and location of the cartridge aperture, pressure pad, and characteristics necessary for its appropriate flatness, clearance, and location of film in the camera aperture of 200-ft (60-m) capacity 8-mm type S model I sound motion-picture film camera cartridges.
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
SMPTE 197-2003
Motion-Picture Film (8-mm Type S) - 50-Ft Model 1 Sound Camera Cartridge - Cartridge, Cartridge-Camera Interface and Take-Up Core
电影胶片(8-mm S型)-50英尺型号1声音摄像机墨盒-墨盒、墨盒摄像机接口和卷取芯
2003-01-01
现行
GOST 25505-1982
Кинокамеры любительские. Кассета для 8-мм кинопленки типа С модели 1. Основные и присоединительные размеры
运动相机 8毫米胶片型S型胶条1.基本和连接尺寸
现行
SMPTE 159.1-2001(Stabilized 2012)
Motion-Picture Film (8-mm Type S) - Model 1 Camera Cartridge - Cartridge-Camera Interface and Take-Up Core Drive
电影胶片(8-mm S型)-型号1相机墨盒-墨盒相机接口和卷取芯驱动器
2001-01-01
现行
SMPTE 199-2003
Motion-Picture Film (8-mm Type S) - 50-Ft Model 1 Sound Camera Cartridge - Pressure Pad Flatness and Camera Aperture Profile
电影胶片(8-mm S型)-50英尺型号1声音照相机墨盒-压力垫平面度和照相机光圈轮廓
2003-01-01
现行
SMPTE 200M-2003
Motion-Picture Equipment (8-mm Type S) - Model 1 Camera Cartridge - Camera Run Length, Perforation Cutout and End-of-Run Notch
电影设备(8-mm S型).型号1照相机墨盒.照相机运行长度 穿孔切口和运行末端切口
2003-01-01
现行
SMPTE 198-2003
Motion-Picture Film (8-mm Type S) - 50-Ft Model 1 Sound Camera Cartridge - Aperture, Pressure Pad and Film Position
电影胶片(8-mm S型)-50英尺型号1声音照相机墨盒-光圈、压力垫和胶片位置
2003-01-01
现行
SMPTE 166-2004
Motion-Picture Film (8-mm Type S) - Exposure Control and Stock Identification - Sound and Silent Camera Cartridge Notches
电影胶片(8-mm S型).曝光控制和库存识别.声音和无声照相机墨盒槽口
2004-01-01
现行
SMPTE 205-1993
Motion-Picture Equipment (8-mm Type S) - Model 1 Camera Cartridge - Interface and Take-Up Core Drive (200-Ft Capacity) (R2003)
电影设备(8-mm S型).型号1照相机墨盒.接口和卷取核心驱动器(200英尺容量)(R2003)
1993-01-01
现行
SMPTE 159.2-2001(Stabilized 2012)
Motion-Picture Film (8-mm Type S) - Model 1 Camera Cartridge - Aperture, Profile, Film Position, Pressure Pad and Flatness
电影胶片(8-mm S型).型号1照相机墨盒.光圈 轮廓 胶片位置 压力垫和平整度
2001-01-01
现行
ISO 3641-1976
Cinematography — Motion-picture camera cartridge, 8 mm Type S Model II — Cartridge fit and take-up core drive — Dimensions and specifications
电影摄影与摄影;电影摄影机墨盒 8 mm S型II型——筒装和卷取芯驱动——尺寸和规格
1976-06-01
现行
ISO 3024-1983
Cinematography — Motion-picture camera cartridge, 8 mm type S, model 1 — Camera run length, perforation cut-out and end-of-run notch in film — Specifications
电影摄影与摄影;电影摄影机墨盒 8 mm S型 型号1——摄影机运行长度、穿孔切口和胶片运行末端缺口——规格
1983-10-01
现行
ISO 1780-1984
Cinematography — Motion-picture camera cartridge, 8 mm Type S Model I — Aperture, camera aperture profile, film position, pressure pad and pressure pad flatness — Dimensions and specifications
电影摄影与摄影;电影摄影机墨盒 8 mm S型I型——光圈、相机光圈轮廓、胶片位置、压力垫和压力垫平面度——尺寸和规格
1984-11-01
现行
ISO 3646-1976
Cinematography — Motion-picture camera cartridge, 8 mm Type S Model II — Slots, projections and cartridge hole for indicating film speed, colour balance and film identification — Dimensions and positions
电影摄影与摄影;电影摄影机墨盒 8 mm S型II型——用于指示胶卷速度、颜色平衡和胶卷标识的槽、投影和墨盒孔——尺寸和位置
1976-07-01