现行

BS EN ISO 2507-1-2017

Thermoplastics pipes and fittings. Vicat softening temperature-General test method
热塑性塑料管和配件 维卡软化温度 通用试验方法

2018-05-31

现行

ISO 8361-1-1991

Thermoplastics pipes and fittings — Water absorption — Part 1: General test method
热塑性塑料管道和配件——吸水率第1部分:通用试验方法

1991-09-05

现行

GOST 32415-2013

Трубы напорные из термопластов и соединительные детали к ним для систем водоснабжения и отопления. Общие технические условия
压力热塑管及其供水和供暖系统的配件 一般规格

2013-11-14

现行

BS EN 12107-1998

Plastics piping systems. Injection-moulded thermoplastics fittings, valves and ancillary equipment. Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
塑料管道系统 注塑热塑性塑料配件、阀门和辅助设备 管道部件注射成型用热塑性材料长期静水压强度的测定

1998-03-15

现行

UNE-EN 12107-1998

PLASTICS PIPING SYSTEMS. INJECTION-MOULDED THERMOPLASTICS FITTINGS, VALVES AND ANCILLARY EQUIPMENT. DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS FOR INJECTION MOULDING OF PIPING COMPONENTS.
塑料管道系统 注塑热塑性塑料配件、阀门和辅助设备 管道部件注射成型用热塑性材料长期静水压强度的测定

1998-05-07

现行

KS M ISO 2507-1(2020 Confirm)

열가소성 플라스틱 관 및 이음관－ 비카트 연화 온도－제1부：일반 시험 방법
热塑性塑料管材及管件维卡软化温度第1部分:通用试验方法

2005-12-29

现行

GOST R ISO 2507-1-2015

Трубы и соединительные детали из термопластов. Температура размягчения по Вика. Часть 1. Общий метод испытания
热塑性塑料管和配件 维卡软化温度 一般测试方法

现行

ISO 2507-1-1995

Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method
热塑性塑料管道和配件——维卡软化温度第1部分:一般试验方法

1995-02-02

现行

BS EN ISO 1167-1-2006

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure-General method
流体输送用热塑性塑料管、配件和组件 内压阻力的测定 一般方法

2006-08-31

现行

AS/NZS 1462.29-2019

Methods of test for plastic pipes and fittings, Method 29: Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
塑料管道和配件的试验方法 方法29:塑料管道和管道系统.用外推法测定管形热塑性材料的长期静水压强度

2019-12-15

现行

KS M ISO 1167-1(2019 Confirm)

유체이송용 열가소성 플라스틱관, 이음관 및 조립품 — 내압저항성의 평가 — 제1부: 일반 방법
用于输送流体的热塑性塑料管道 配件和组件 - 耐内压性的测定 - 第1部分:一般方法

2014-10-23

现行

ISO 1167-1-2006

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method
流体输送用热塑性塑料管、配件和组件——耐内压性的测定第1部分:一般方法

2006-01-30

现行

GOST ISO 1167-1-2013

Трубы, соединительные детали и узлы соединений из термопластов для транспортирования жидких и газообразных сред. Определение стойкости к внутреннему давлению. Часть 1. Общий метод
用于运输流体的热塑性塑料管道 配件和组件 测定内压耐受性 一般方法

2013-12-27

现行

JIS K 7030-1997

Pipes and fittings made of glass fiber reinforced thermosetting plastics (GRP) -- Definitions of terms relating pressure, including relationship between them, and terms for installation and jointing
玻璃纤维增强热固性塑料（GRP）制管道和管件压力相关术语的定义 包括它们之间的关系 以及安装和连接术语

1997-01-01

现行

DIN EN ISO 2507-1

Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995)
热塑性塑料管和配件维卡软化温度第1部分:通用试验方法

2018-01-01

现行

BS EN 803-1995

Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust
塑料管道系统 压力管道弹性密封环式接头用注射成型热塑性塑料配件 无端推力的短期内压耐受性试验方法

1995-07-15

现行

UNE-EN 803-1995

PLASTICS PIPING SYSTEMS. INJECTION-MOULDED THERMOPLASTICS FITTINGS FOR ELASTIC SEALING RING TYPE JOINTS FOR PRESSURE PIPING. TEST METHOD FOR RESISTANCE TO A SHORT-TERM INTERNAL PRESSURE WITHOUT END THRUST.
塑料管道系统 压力管道弹性密封环式接头用注射成型热塑性塑料配件 无端推力的短期内压耐受性试验方法

1995-09-18

现行

DIN 16917-1

Pipes and fittings made of thermoplastic materials with profiled wall and smooth pipe inside - Large pipes over DN 1200 for underground installation - Part 1: General requirements and performance characteristics
带异形壁和光滑管的热塑性材料制管道和配件.地下安装用DN 1200以上的大管.第1部分:一般要求和性能特征

2015-10-01

现行

DIN EN 803

Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust
塑料管道系统.压力管道用弹性密封环型接头用注射成型热塑性塑料配件.无端推力的短期内压耐受性试验方法；德文版EN 803:1994

1994-08-01

现行

DIN EN ISO 1167-1

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
流体输送用热塑性塑料管、配件和组件.耐内压性的测定.第1部分:通用方法（ISO 1167-1-2006）；德文版EN ISO 1167-1:2006

2006-05-01