首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM F493-22
到馆提醒
收藏跟踪
购买正版
Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings 氯化聚氯乙烯(CPVC)塑料管和配件用溶剂胶
发布日期: 2022-10-01
1.1 本规范规定了用于连接氯化聚氯乙烯管、管道和承插式配件的氯化聚氯乙烯(CPVC)溶剂水泥的要求。 1.2 CPVC溶剂水泥用于CPVC 41氯化聚氯乙烯管道、管道和配件,符合规范中规定的23447级 1784美元 . 1.3 连接CPVC管道和配件的推荐程序见 附录X1 。另请参见实践 F3328电话 和 2855美元 . 1.4 本规范的文本引用了注释、脚注和附录,它们提供了解释性材料。这些注释和脚注(表和图中的除外)不应视为本规范的要求。 1.5 以英寸-磅单位表示的数值视为标准值。括号中给出的值是数学转换为SI单位,仅供参考,不被视为标准单位。 1.6 以下安全危险警告仅适用于第节的试验方法部分 6. 本规范的: 本标准并不旨在解决与其使用相关的所有安全问题(如有)。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。
1.1 This specification provides requirements for chlorinated poly(vinyl chloride) (CPVC) solvent cements to be used in joining chlorinated poly(vinyl chloride) pipe, tubing, and socket-type fittings. 1.2 CPVC solvent cements are used with CPVC 41 chlorinated poly(vinyl chloride) pipe, tubing, and fittings, which meet Class 23447 as defined in Specification D1784 . 1.3 A recommended procedure for joining CPVC pipe and fittings is given in Appendix X1 . See also Practices F3328 and D2855 . 1.4 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The following safety hazards caveat pertains only to the test methods portion, Section 6 , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: F17.20
相似标准/计划/法规
现行
ASTM D2564-20(2024)
Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
聚氯乙烯(PVC)塑料管道系统用溶剂型粘合剂标准规范
2024-09-01
现行
ASTM F3328-18(2024)
Standard Practice for the One-Step (Solvent Cement Only) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
用锥形套筒连接聚氯乙烯(PVC)或氯化聚氯乙烯(CPVC)管道和管道部件的一步法(仅溶剂胶)的标准规程
2024-10-01
现行
ASTM D2855-20(2024)
Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
用锥形套筒连接聚氯乙烯(PVC)或氯化聚氯乙烯(CPVC)管道和管道部件的两步(底漆和溶剂粘合剂)方法的标准规程
2024-09-01
现行
ASTM F2855-19(2024)
Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
氯化聚氯乙烯/铝/氯化聚氯乙烯(CPVC-AL-CPVC)复合压力管的标准规范
2024-02-01
现行
ASTM F656-21
Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
聚氯乙烯(PVC)塑料管和配件溶剂水泥接头用引物标准规范
2021-04-01
现行
ASTM D4216-22
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
硬质聚氯乙烯(PVC)及相关PVC和氯化聚氯乙烯(CPVC)建筑产品化合物的标准规范
2022-05-01
现行
ASTM D6263-23
Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
硬质聚氯乙烯(PVC)和氯化聚氯乙烯(CPVC)制成的挤压棒材和棒材的标准规范
2023-02-01
现行
ASTM D1784-20
Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
硬质聚氯乙烯(PVC)化合物和氯化聚氯乙烯(CPVC)化合物的标准分类系统和基本规范
2020-01-15
现行
ASTM F442/F442M-23
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
氯化聚氯乙烯塑料管(SDR–PR)标准规范
2023-02-01
现行
PIP PN01PU0C01
Piping Material Specification 1PU0C01 Chlorinated Poly (Vinyl Chloride) (CPVC), Cement, 0.000" C.A. Process [Complete Revision]
管道材料规范1PU0C01 0.000“C.A.工艺用氯化聚氯乙烯(CPVC)水泥[完整修订版]
2013-03-01
现行
ASTM F1970-23
Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
聚氯乙烯(PVC)或氯化聚氯乙烯(CPVC)系统中使用的特殊工程配件、附件或阀门的标准规范
2023-02-15
现行
ASTM D4396-22
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
非压力应用塑料管和配件用硬质聚氯乙烯(PVC)和氯化聚氯乙烯(CPVC)化合物
2022-09-01
现行
ASTM F441/F441M-23
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
表40和表80氯化聚氯乙烯塑料管标准规范
2023-02-01
现行
ASTM F439-24
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
80级氯化聚氯乙烯塑料管件标准规范
2024-04-01
现行
ASTM D3138-21
Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
丙烯腈-丁二烯-苯乙烯(ABS)和聚氯乙烯(PVC)非压力管道部件之间过渡接头用溶剂粘合剂的标准规范
2021-11-01
现行
ASTM D2846/D2846M-24
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
氯化聚氯乙烯塑料热水和冷水分配系统的标准规范
2024-04-01
现行
ASTM F437-24
Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
螺纹氯化聚氯乙烯(CPVC)塑料管件标准规范 表80
2024-04-01
现行
ASTM F2618-24
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
化学废物排放系统用氯化聚氯乙烯(CPVC)管和配件的标准规范
2024-04-01
现行
ASTM F438-23
Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
承插型氯化聚氯乙烯(CPVC)塑料管件 表40
2023-04-01