1.1 本规程提供了修改静态轴承试验方法的说明，以确定承受循环轴承力的复合材料的疲劳行为。复合材料形式仅限于连续纤维增强聚合物基复合材料，其中层压板相对于测试方向对称且平衡。可接受的测试层压板和厚度的范围在 8.2 。 1.2 本规程是对试验方法的补充 D5961/D5961米 具有在循环载荷下测试试样的规定。 本规程未规定几个重要的试样参数（例如，紧固件选择、紧固件安装方法和疲劳力/应力比）；然而，可重复的结果要求指定并报告这些参数。 1.3 这种做法仅限于承受恒定振幅单轴载荷的试样，其中控制机器，使试样承受重复的恒定振幅力（应力）循环。工程应力或施加的力都可以用作恒幅疲劳变量。 重复荷载可以是拉伸、压缩或反向荷载，具体取决于所使用的试样和程序。 1.4 以国际单位制或英寸磅单位表示的数值应单独视为标准。每个系统中规定的值不一定是完全相等的；因此，为了确保符合标准，每个系统应独立使用，并且两个系统的值不得组合。 1.4.1 在文本中，英寸磅单位显示在括号中。 1.5 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ===意义和用途====== 5.1 请参阅指南 D8509 。

1.1 This practice provides instructions for modifying static bearing test methods to determine the fatigue behavior of composite materials subjected to cyclic bearing forces. The composite material forms are limited to continuous-fiber reinforced polymer matrix composites in which the laminate is both symmetric and balanced with respect to the test direction. The range of acceptable test laminates and thicknesses are described in 8.2 . 1.2 This practice supplements Test Method D5961/D5961M with provisions for testing specimens under cyclic loading. Several important test specimen parameters (for example, fastener selection, fastener installation method, and fatigue force/stress ratio) are not mandated by this practice; however, repeatable results require that these parameters be specified and reported. 1.3 This practice is limited to test specimens subjected to constant amplitude uniaxial loading, where the machine is controlled so that the test specimen is subjected to repetitive constant amplitude force (stress) cycles. Either engineering stress or applied force may be used as a constant amplitude fatigue variable. The repetitive loadings may be tensile, compressive, or reversed, depending upon the test specimen and procedure utilized. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.4.1 Within the text the inch-pound units are shown in brackets. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 Refer to Guide D8509 .