1.1 这些测试方法规定了用于测试和评估电动跑步机是否符合规范的程序和设备 F2115 . 将评估设计和操作参数。在可能和适用的情况下，将使用和参考其他认可机构的认可测试方法。如果本文件与规范之间存在冲突 F2115 规格 F2115 优先。 1.2 本试验方法将与规范一起使用 F2276页 ，试验方法 F2571 ，和规格 F2115 . 1.3 本标准优先于规范 F2276页 和试验方法 F2571 在机动跑步机专用区域。 1.4 要求- 测试电动跑步机的以下所有参数: 1.4.1 稳定性 1.4.2 外观设计， 1.4.3 耐久荷载， 1.4.4 静态负载， 1.4.5 可调倾斜系统， 1.4.6 控制， 1.4.7 电动驱动系统， 1.4.8 折叠式跑步机， 1.4.9 其他通用设计要求， 1.4.10 文档 1.4.11 标记，以及 1.4.12 警告/警告标签。 1.5 本试验方法 2. 包含解决残疾人无障碍使用设备的附加要求。 1.6 以国际单位制表示的数值应视为标准。括号中的值仅供参考。 1.7 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.8 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 这些试验方法的目的是为根据制造商规范组装和维护的电动跑步机的评估提供可靠和可重复的试验方法。结合规范使用这些试验方法 F2115 规格 F2276页 和试验方法 F2571 旨在确保电动跑步机的适当性能和可靠性，并减少因设计缺陷造成严重伤害的风险。

1.1 These test methods specify procedures and equipment used for testing and evaluating a motorized treadmill for compliance to Specification F2115 . Both design and operational parameters will be evaluated. Where possible and applicable, accepted test methods from other recognized bodies will be used and referenced. In case of a conflict between this document and Specification F2115 , Specification F2115 takes precedence. 1.2 This test method is to be used in conjunction with Specification F2276 , Test Methods F2571 , and Specification F2115 . 1.3 This standard takes precedence over Specification F2276 and Test Methods F2571 in areas that are specific to motorized treadmills. 1.4 Requirements— A motorized treadmill is to be tested for all of the following parameters: 1.4.1 Stability, 1.4.2 Exterior design, 1.4.3 Endurance loading, 1.4.4 Static loading, 1.4.5 Adjustable incline system, 1.4.6 Controls, 1.4.7 Motorized drive system, 1.4.8 Folding treadmills, 1.4.9 Additional universal design requirements, 1.4.10 Documentation, 1.4.11 Marking, and 1.4.12 Warnings/Warning labels. 1.5 This test method 2 contains additional requirements to address the accessibility of the equipment for persons with disabilities. 1.6 The values stated in SI units are to be regarded as the standard. The values in parenthesis are for information only. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 The purpose of these test methods is to provide reliable and repeatable test methods for the evaluation of motorized treadmills assembled and maintained according to the manufacturer's specifications. Use of these test methods in conjunction with Specification F2115 , Specification F2276 , and Test Methods F2571 is intended to ensure appropriate performance and reliability of a motorized treadmill and reduce the risk of serious injury from design deficiencies.