IEC 60079-32-2:2015描述了避免静电引起的点火和静电冲击危险所需的设备、产品和工艺特性的试验方法。它用于静电危害的风险评估，或用于电气或非电气机器或设备的产品系列或专用产品标准的编制。IEC 60079本部分的目的是提供用于静电控制的标准试验方法，如表面电阻、接地泄漏电阻、粉末电阻率、液体电导率、电容和激发放电燃烧性的评估。它特别适用于IEC 60079系列的现有标准。 IEC 60079的这一部分介绍了最新的知识状态，但可能与其他标准的要求略有不同，尤其是关于试验气候的要求。当本标准的要求与IEC 60079-0中规定的要求发生冲突时，为避免重新测试先前批准的设备，IEC 60079-0中的要求仅适用于IEC 60079-0范围内的设备。在所有其他情况下，IEC 60079本部分中的声明适用。 关键词:点火和静电冲击危险、静电

IEC 60079-32-2:2015 describes test methods concerning the equipment, product and process properties necessary to avoid ignition and electrostatic shock hazards arising from static electricity. It is intended for use in a risk assessment of electrostatic hazards or for the preparation of product family or dedicated product standards for electrical or non-electrical machines or equipment. The purpose of this part of IEC 60079 is to provide standard test methods used for the control of static electricity, such as surface resistance, earth leakage resistance, powder resistivity, liquid conductivity, capacitance and evaluation of the incendivity of provoked discharges. It is especially intended for use with existing standards of the IEC 60079 series. This part of IEC 60079 presents the latest state of knowledge which may, however, slightly differ from requirements in other standards, especially concerning test climates. When a requirement of this standard conflicts with a requirement specified in IEC 60079-0, to avoid the possibility of re-testing previously approved equipment, the requirement in IEC 60079-0 applies only for equipment within the scope of IEC 60079-0. In all other cases, the statements in this part of IEC 60079 apply. Keywords: ignition and electrostatic shock hazards, static electricity