BS EN 840-2:2020-移动垃圾和回收容器-国家数字标准馆

现行 BS EN 840-2:2020

到馆阅读

收藏跟踪

购买正版

Mobile waste and recycling containers-Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices. Dimensions and design 移动垃圾和回收容器

发布日期： 2020-04-17

本文件规定了移动式废物容器的尺寸和设计要求
车轮，带平盖，容量高达1300 l，用于耳轴和/或梳齿提升装置。
这些容器仅批准用于前面明确提到的起吊设备。交叉引用:EN ISO 11469EN 1501-5EN 840-6EN 840-5EN 1501-3EN 840-1EN 1501-2EN 14803EN 1501-1购买本文件时可获得的所有现行修订均包含在购买本文件中。

This document specifies dimensions and design requirements of mobile waste containers with 4
wheels, with flat lid(s) and capacity up to 1 300 l to be used by trunnion and/or comb lifting device.
These containers are only approved for the before explicitly mentioned lifting devices.Cross References:EN ISO 11469EN 1501-5EN 840-6EN 840-5EN 1501-3EN 840-1EN 1501-2EN 14803EN 1501-1All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS EN 840-6-2020

Mobile waste and recycling containers-Safety and health requirements
移动垃圾和回收容器

BS EN 840-1-2020

Mobile waste and recycling containers-Containers with 2 wheels with a capacity up to 400 l for comb lifting devices. Dimensions and design
移动垃圾和回收容器

BS EN 840-5-2020

Mobile waste and recycling containers-Performance requirements and test methods
移动垃圾和回收容器

BS EN 840-3-2020

Mobile waste and recycling containers-Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices. Dimensions and design
移动垃圾和回收容器

BS EN 840-4-2020

Mobile waste and recycling containers-Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices. Dimensions and design
移动垃圾和回收容器

AS 4123.1-2008[ Pending Revision ]

Mobile waste containers, Part 1: Containers with two wheels and a capacity up to 400 L for lifting devices - Dimensions and design
移动式废物容器第1部分:起重装置用容量不超过400L的双轮容器.尺寸和设计

UNE-EN 840-1-2004

Mobile waste containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design
移动式废物容器.第1部分:梳齿提升装置用容量不超过400L的2轮容器.尺寸和设计

UNE-EN 840-3-2004

Mobile waste containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design
移动式废物容器.第3部分:耳轴和/或梳状提升装置用容量不超过1300L的带圆顶盖的四轮容器.尺寸和设计

UNE-EN 840-2-2004

Mobile waste containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design
移动式废物容器.第2部分:耳轴和/或梳状提升装置用容量不超过1300L、带平盖的四轮容器.尺寸和设计

UNE-EN 840-4-2004

Mobile waste containers - Part 4: Containers with 4 wheels with capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting device - Dimensions and design
移动式废物容器.第4部分:宽耳轴或BG和/或宽梳式提升装置用4轮容量不超过1700L平盖容器.尺寸和设计

AS 4123.4-2008[ Pending Revision ]

Mobile waste containers, Part 4: Containers with four wheels with a capacity from 750 L to 1700 L with flat lid(s), for wide trunnion or BG and/or wide comb lifting devices - Dimensions and design
移动式废物容器第4部分:宽耳轴或BG和/或宽梳式提升装置用四轮容量为750 L至1700 L带平盖的容器.尺寸和设计

AS 4123.2-2008[ Pending Revision ]

Mobile waste containers, Part 2: Containers with four wheels with a capacity from 500 L to 1200 L with flat lid(s), for trunnion and/or lifting devices - Dimensions and design
移动式废物容器第2部分:耳轴和/或提升装置用容量为500 L至1200 L的带平盖四轮容器.尺寸和设计

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统