1.1 本试验方法是承受均匀静载荷的玻璃负荷试验的一般试验程序。它适用于涉及指定负载、负载持续时间和负载率的测试协议。 1.2 本试验方法适用于各种类型的建筑平板玻璃；例如，退火、热强化、完全回火、层压、绝缘及其组合。 1.3 本试验方法描述了对玻璃施加特定试验载荷的过程。可使用本文规定的标准测试框架或用户设计的测试框架进行测试。 1.4 以国际单位制表示的数值应视为标准值。国际单位制后括号中给出的值仅供参考，不被视为标准值。 1.5 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 有关具体的预防说明，请参阅第节 7. . 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 5.1 本试验方法是在均匀静载荷下测试建筑玻璃产品的通用程序。 5.2 窗户、幕墙和门中玻璃的荷载在大小、方向和持续时间上可能会有很大差异。需要了解建筑物上的风荷载，以选择测试荷载并解释与特定场地预期暴露相关的结果。 5.3 为了解释本试验方法的结果，需要彻底了解玻璃强度的变化和负载的性质。 5.4 正确使用本试验方法需要了解压力、挠度和应变测量原理。

1.1 This test method is a general test procedure for load tests of glass subjected to uniform static loads. It is applicable for test protocols involving specified loads, load durations, and loading rates. 1.2 This test method is applicable to architectural flat glass of various types; for example, annealed, heat-strengthened, fully tempered, laminated, insulating, and combinations thereof. 1.3 This test method describes a process of applying specific test loads to glass. The test may be conducted using a standard test frame specified herein or a test frame of the user's design. 1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements see Section 7 . 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 This test method is a general procedure for testing architectural glass products under uniform static loads. 5.2 Loads on glass in windows, curtain walls, and doors may vary greatly in magnitude, direction, and duration. An understanding of wind loads on the building is required for selection of test loads and interpretation of results with respect to expected exposure at a particular site. 5.3 A thorough understanding of the variations of the strength of glass and the nature of loading is required to interpret results of this test method. 5.4 The proper use of this test method requires a knowledge of the principles of pressure, deflection, and strain measurement.