Copper and copper alloys. Eddy current testing on the outer surface of rods, bars, hollow rods and wires for the detection of defects by encircling test coil
铜和铜合金 在棒材、棒材、空心棒材和线材的外表面进行涡流检测 通过环绕测试线圈检测缺陷
发布日期:
2019-07-16
本文件规定了一种全自动涡流检测程序,无需操作员参与环绕式检测线圈,用于检测铜和铜合金棒、棒、空心棒和电线表面的缺陷,最小直径或宽度在相关产品标准中规定。
该测试方法可以是连续的,也可以是不连续的,具体取决于产品。
相关产品标准中定义了产品尺寸范围和测试验收水平。交叉引用:EN ISO 15549EN ISO 9712EN ISO 12718EN 12163EN 12166EN 12168EN 12167EN 12164EN 12165购买本文件时提供的所有当前修订版均包含在购买本文件中。
This document specifies a procedure for fully automatic eddy current testing with no operator involvement with an encircling test coil for detecting defects on the surface of copper and copper alloy rods, bars, hollow rods and wires with a minimum diameter or width across flats defined in the relevant product standards.
This test method can be continuous or discontinuous depending on the product.
The product size range and test acceptance level are defined in the relevant product standards.Cross References:EN ISO 15549EN ISO 9712EN ISO 12718EN 12163EN 12166EN 12168EN 12167EN 12164EN 12165All current amendments available at time of purchase are included with the purchase of this document.