本文件规定了试样的制备方法和使用的试验方法 用于测定聚醚醚酮（PEEK）模塑和挤出材料的性能。 处理试验材料和在模制前调节试验材料的要求 并给出了试验前的试样。 试样制备程序和条件以及性能测量程序 文中还介绍了制作这些试样的材料。性能和测试方法 列出了PEEK模塑和挤出材料的适用性和必要性。 为了获得可重复和可比较的试验结果，使用本文规定的制备和调节方法、试样尺寸和试验程序。 确定的值不一定与使用不同尺寸的试样或使用不同程序制备的试样获得的值相同。交叉引用:ISO 15512ISO 11443IEC 60112ISO 10350-1ISO 1133-1ISO 294-3ISO 75-1ISO 294-4ISO 11359-2ISO 1183-1ISO 178ISO 3915IEC 60296IEC 60243-1ISO 294-1ISO 75-2ISO 62ISO 23153-1ISO 1183-3ISO 11357-3ISO 20753IEC 60695-11？10 ISO 527-2ISO 527-1IEC 62631-2-1ISO 179-1IEC 62631-3-1ISO 11357-2购买本文件时可获得的所有现行修订均包含在购买本文件中。

This document specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyetheretherketone (PEEK) moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given. Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are also given. Properties and test methods that are suitable and necessary to characterize PEEK moulding and extrusion materials are listed. In order to obtain reproducible and comparable test results, the methods of preparation and conditioning, the specimen dimensions and the test procedures specified herein are used. Values determined will not necessarily be identical to those obtained using specimens of different dimensions or prepared using different procedures.Cross References:ISO 15512ISO 11443IEC 60112ISO 10350-1ISO 1133-1ISO 294-3ISO 75-1ISO 294-4ISO 11359-2ISO 1183-1ISO 178ISO 3915IEC 60296IEC 60243-1ISO 294-1ISO 75-2ISO 62ISO 23153-1ISO 1183-3ISO 11357-3ISO 20753IEC 60695-11?10ISO 527-2ISO 527-1IEC 62631-2-1ISO 179-1IEC 62631-3-1ISO 11357-2All current amendments available at time of purchase are included with the purchase of this document.