BS ISO 18375:2016描述了一种用于确定偏航稳定性的开环试验方法 指在低摩擦路面上行驶的车辆。它适用于重型车辆，即商用车辆， ISO 3833中定义的商用车辆组合、客车和铰接式客车（卡车和 最大重量超过3.5吨的拖车以及最大重量的客车和铰接式客车 根据ECE和EC车辆分类，M3、N2、N3、O3和O4）类别，超过5吨。该方法适用于配备电子偏航稳定控制系统的车辆。由于该试验的结果在很大程度上取决于路面摩擦的局部和临时变化，因此 国际标准给出了保持摩擦水平尽可能均匀的建议 试验结果的重现性良好。交叉引用:ISO 15037-2:2002ISO 3833 ISO 8855购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS ISO 18375:2016 describes an open-loop test method for determining the yaw stability of a vehicle on a low friction road surface. It applies to heavy vehicles, that is commercial vehicles, commercial vehicle combinations, buses and articulated buses as defined in ISO 3833 (trucks and trailers with maximum weight above 3,5 tonnes and buses and articulated buses with maximum weight above 5 tonnes, according to ECE and EC vehicle classification, categories M3, N2, N3, O3 and O4).The method is intended for vehicles equipped with electronic yaw-stability control systems.As the results of this test depend largely on local and temporary changes in road surface friction, this International Standard gives recommendations about keeping the friction level as uniform as possible for good reproducibility of the test results.Cross References:ISO 15037-2:2002ISO 3833ISO 8855All current amendments available at time of purchase are included with the purchase of this document.