IEC 60364-7-701:2019适用于浴缸和/或淋浴器打算永久放置在特定位置的室内或室外位置的电气装置。 包含浴缸和/或淋浴的位置的范围受以下限制: -最低的完工地板水平； -最低完工地面以上3m的水平面； -在距用于浴缸或淋浴的固定出水口4m的距离处的垂直外接虚拟表面；和 -与包含浴缸或淋浴的位置接壤的墙壁、地板和天花板内的体积，深度为6厘米。 本文件的要求也适用于移动应用中的固定电气装置，例如大篷车、活动房屋、淋浴容器。本文件不适用于应急设施，例如工业区或实验室使用的应急淋浴。这第三版取消并取代了2006年出版的第二版。本版构成技术修订版。 与上一版相比，此版本包括以下重大技术变更: -范围给出了与本文件应用相关的精确性； -改进了区域的描述； -定义了相关术语。

IEC 60364-7-701:2019 applies to electrical installations in indoor or outdoor locations where a bath tub and/or a shower is intended to be permanently placed in a specific location.
The extent of the location containing a bath tub and/or a shower is limited by:
– the lowest finished floor level;
– a horizontal plane 3 m above the lowest finished floor level;
– a vertical circumscribing virtual surface at a distance of 4 m from the fixed water outlet for the bath tub or shower; and
– the volume within the walls, floor and ceiling that border the location containing a bath or shower, measured to a depth of 6 cm.
The requirements of this document also apply to fixed electrical installations in mobile applications, for example caravans, mobile homes, shower containers. This document does not apply to emergency facilities, for example emergency showers used in industrial areas or laboratories.
This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
– the scope gives precisions relevant to the application of this document;
– the description of zones is improved;
– relevant terms are defined.