MIL MIL-A-48449A Notice 2-Validation-对准装置光学枪孔-国家数字标准馆

现行 MIL MIL-A-48449A Notice 2-Validation

到馆提醒

收藏跟踪

购买正版

Alignment Device, Optical, Gun Bore 对准装置光学枪孔

发布日期： 2013-03-12

本规范涵盖M139、M140、M139A1、M140A1和M154|对准装置，这些装置提供近距离光学参考，以检查武器现场的火控瞄准线。它们每个都有一个发光的标线。

This specification covers the M139, M140, M139A1, M140A1 and M154|Alignment Devices which provide a close-in optical reference to check the boresight of the fire control at the weapon site. They each have an illuminated reticle.

分类信息

发布单位或类别：美国-美国军事规范和标准

关联关系

研制信息

相似标准/计划/法规

MIL MIL-A-48449A Notice 3-Validation 2

Alignment Device, Optical, Gun Bore
光学对准装置炮膛

MIL MIL-A-48449A

ALIGNMENT DEVICE, OPTICAL, GUN BORE (SUPERSEDING MIL-A-48449)
枪膛光学对准装置（取代MIL-A-48449）

MIL MIL-A-48449A Amendment 2

ALIGNMENT DEVICE, OPTICAL, GUN BORE (SUPERSEDING MIL-A-48449)
对准设备光学枪孔（取代MIL-A-48449）

MIL MIL-A-48449A Amendment 4

ALIGNMENT DEVICE, OPTICAL, GUN BORE (SUPERSEDING MIL-A-48449)
枪膛光学对准装置（取代MIL-A-48449）

MIL MIL-A-48449A Amendment 3

ALIGNMENT DEVICE, OPTICAL, GUN BORE (SUPERSEDING MIL-A-48449)
对准设备光学枪孔（取代MIL-A-48449）

BS EN 61755-3-10-2017

Fibre optic interconnecting devices and passive components. Connector optical interfaces-Connector parameters of non-dispersion shifted single mode physically contacting fibres. Non-angled, ferrule-less, bore alignment connectors
光纤互连设备和无源元件连接器光学接口

IEC 61755-3-10-2016

Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-10: Connector parameters of non-dispersion shifted single mode physically contacting fibres - non-angled, ferrule-less, bore alignment connectors
光学纤维互连器件和无源元件 - 连接器光学接口 - 第3-10部分:非色散位移单模光纤物理接触光纤的连接器参数 - 无角度无套圈孔对准连接器

BS EN 61300-3-42-2008

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures-Examinations and measurements. Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves
光纤互连设备和无源元件基本测试和测量程序

IEC 61300-3-42-2007

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-42: Examinations and measurements - Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves
光纤互连器件和被动元件 - 基本测试和测量程序 - 第3-42部分:检查和测量 - 具有弹性对准套管的单模对准套管或适配器的衰减

BS EN 61300-3-46-2011

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures-Measurement. Bore diameter for guide pin in MT ferrules
光纤互连设备和无源元件基本测试和测量程序

DIN EN 61755-3-10

Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-10: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Non-angled, ferrule-less, bore alignment connectors (IEC 61755-3-10:2016); German version EN 61755-3-10:2017
纤维光学互连器件和无源元件.连接器光学接口.第3-10部分:非色散位移单模物理接触光纤的连接器参数.无角度、无套圈、孔对准连接器（IEC 61755-3-10-2016）；德文版EN 61755-3-10:201

BS EN 61300-2-24-2010

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures-Tests. Screen testing of ceramic alignment split sleeve by stress application
光纤互连设备和无源元件基本测试和测量程序

IEC 61300-3-46-2011

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-46: Measurement - Bore diameter for guide pin in MT ferrules
光纤互连器件和被动元件 - 基本测试和测量程序 - 第3-46部分:测量 - 孔中引导针的孔径

KS C IEC 61300-2-24(2017 Confirm)

광섬유 연결 소자와 수동광 부품의 기본 시험 및 측정 절차－제2－24부：시험－응력 인가에 의한 세라믹 정렬 분할 슬리브에 대한 선별 시험
纤维光学互连器件和无源器件基本试验和测量程序第2－24部分:试验应力作用下陶瓷对开套管的屏蔽试验

IEC 61300-2-24-2010

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24: Tests - Screen testing of ceramic alignment split sleeve by stress application
光纤互连器件和被动元件 - 基本测试和测量程序 - 第2-24部分:测试 - 通过应力应用进行陶瓷对准分割套管的屏幕测试

KS C IEC 61300-2-24

광섬유 연결 소자와 수동 광부품의 기본 시험 및 측정 절차 — 제2-24부: 시험 — 응력 인가에 의한 세라믹 정렬 분할 슬리브에 대한 선별 시험
纤维光学互连器件和无源元件.基本试验和测量程序.第2-24部分:试验.通过应力施加对陶瓷对准分体式套管的屏幕试验

UNE-EN 61300-2-24-2011

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-24: Tests - Screen testing of ceramic alignment split sleeve by stress application
纤维光学互连器件和无源元件.基本试验和测量程序.第2-24部分:试验.应力作用下陶瓷对准分裂套管的屏蔽试验

UNE-EN 61300-2-24-2001

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-24: Tests - Screen testing of ceramic alignment split sleeve by stress application.
纤维光学互连器件和无源元件.基本试验和测量程序.第2-24部分:试验.应力作用下陶瓷对准分裂套管的屏蔽试验

BS EN IEC 61300-3-54-2019

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures-Examinations and measurements. Angular misalignment between ferrule bore axis and ferrule axis for cylindrical ferrules
光纤互连设备和无源元件基本测试和测量程序

IEC 61300-3-33-2022

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using pin gauges
纤维光学互连器件和无源元件.基本试验和测量程序.第3-33部分:检查和测量.使用销规从弹性定位套管中拔出的力

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统