范围:本文件规定了一种拉伸试验方法，用于测定两种材料之间的粘结强度 轴承金属和背衬。该试验可应用于带有轴承金属的多层滑动轴承 基于铅、锡、铜或铝。对于测试层厚度≥ 2毫米，原始衬里厚度为 至少需要额外1毫米。 背衬由钢、铸钢或铜合金制成。粘结强度测试不适用于 带有铸铁衬垫的轴承。 该试验适用于所有止推轴承和内径为衬垫的轴颈轴承≥ 90毫米。 该试验可用于对比研究各种材料对粘结强度的影响 工艺和材料类型。此外，该试验适用于生产控制和过程控制 轴承生产资质。 用于对轴承金属和轴承衬垫之间的粘结进行无损超声波检测 金属层厚度≥ 2毫米，见ISO 4386-1。交叉引用:ISO 4381购买本文件时提供的所有现行修订均包含在购买本文件中。

Scope: This document specifies a tensile test method for determination of the bond strength between the bearing metal and the backing. The test can be applied to multilayer plain bearings with bearing metals based on lead, tin, copper or aluminium. For tested layer thicknesses ≥ 2 mm, a raw lining thickness of a minimum additional 1 mm is necessary. The backings are from steel, cast steel or copper alloys. The bond strength test does not apply to bearings with cast iron backing. The test applies to all thrust bearings and to journal bearings with an inner diameter of backing ≥ 90 mm. The test can be used for comparative investigations into the influence on the bond strength of various processes and types of material. In addition, the test is suitable for production control and for process qualification of bearing production. For non-destructive ultrasonic testing of the bond between bearing metal and backing for bearing metal layer thicknesses ≥ 2 mm, see ISO 4386-1.Cross References:ISO 4381All current amendments available at time of purchase are included with the purchase of this document.