SME EM900310-微机械加工中Frm表面粗糙度的特征-国家数字标准馆

现行 SME EM900310

到馆提醒

收藏跟踪

购买正版

Characteristics Of Surface Roughness Of Frm In Micromachining 微机械加工中Frm表面粗糙度的特征

发布日期： 1990-06-01

本文从表面粗糙度的角度研究了FRM的微加工过程。利用金刚石工具对两种FRM（含SIC晶须的FRM和含SIC纤维的FRM）进行了微切削实验。

THIS PAPER DEALS WITH THE MICROMACHINING PROCESS OF FRM FROM THE VIEWPOINT OF SURFACE ROUGHNESS. MICROCUTTING EXPERIMENTS OF TWO TYPES OF FRM, WHICH ARE FRM WITH SIC WHISKERS AND FRM WITH SIC FIBERS, ARE CARRIED OUT EMPLOYING DIAMOND TOOLS.

分类信息

发布单位或类别：日本-日本船用装置工业会

关联关系

研制信息

相似标准/计划/法规

Шероховатость поверхности. Параметры и характеристики
表面粗糙度参数及特点

Characteristics and Enhancement of a Disk Type Humidifier with Hydrophilic Rough Surface
具有亲水粗糙表面的圆盘式加湿器的特性与增强

Characteristics and Enhancement of a Disk Type Humidifier with Hydrophilic Rough Surface
具有亲水粗糙表面的圆盘式加湿器的特性与增强

GB/T 39741.2-2021

滑动轴承公差第2部分：轴和止推轴肩的几何公差及表面粗糙度
Plain bearings—Tolerances—Part 2：Tolerances on geometrical characteristics and surface roughness for shafts and thrust collars

GOST R 8.652-2009

Государственная система обеспечения единства измерений. Приборы контактные (щуповые) для измерений шероховатости поверхности. Метрологические характеристики фазокорректированных фильтров
确保测量一致性的状态系统用于测量表面粗糙度的接触（触针）仪器校正过滤器的计量特征

BS ISO 8503-5-2003

Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Replica tape method for the determination of the surface profile
涂料和相关产品使用前钢衬底的制备喷砂清理钢基体的表面粗糙度特征测定表面轮廓的复制胶带法

BS EN ISO 8503-1-2012

Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates-Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
涂料和相关产品使用前钢衬底的制备喷砂清理钢基体的表面粗糙度特性

KS M ISO 8503-5

도료 및 관련제품의 도장 전 철강 소지 조정 — 마찰 세정된 철강 소지의 표면 거칠기 특성 — 제5부: 표면 조도 측정을 위한 복제 테이프 방법
涂料和相关产品应用前的钢基材的制备 - 喷砂清理钢基材的表面粗糙度特性 - 第5部分:表面轮廓测定的复制带方法

KS M ISO 8503-5

도료 및 관련제품의 도장 전 철강 소지 표면처리 — 블라스트 세정된 철강 소지의 표면 거칠기 특성 — 제5부: 표면 조도 측정을 위한 복제 테이프 방법
涂料和相关产品使用前钢衬底的制备.喷砂清理钢衬底的表面粗糙度特性.第5部分:测定表面轮廓的复制胶带法

GB/T 13288.5-2009

涂覆涂料前钢材表面处理喷射清理后的钢材表面粗糙度特性第5部分：表面粗糙度的测定方法复制带法
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile

ISO 8503-5-2017

Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile
油漆及相关产品应用前的钢基材料的制备 - 喷砂清理钢基材的表面粗糙度特性 - 第5部分:表面轮廓测定的复制带法

BS EN ISO 8503-4-2012

Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates-Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Stylus instrument procedure
涂料和相关产品使用前钢衬底的制备喷砂清理钢基体的表面粗糙度特性

BS EN ISO 8503-3-2012

Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates-Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Focusing microscope procedure
涂料和相关产品使用前钢衬底的制备喷砂清理钢基体的表面粗糙度特性

GB/T 13288.1-2008

涂覆涂料前钢材表面处理喷射清理后的钢材表面粗糙度特性第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义
Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces

KS M ISO 8503-1(2017 Confirm)

도료와 관련 제품의 도장 전 철강 소지 조정－마찰 세정된 철강 소지의 표면 거칠기 특성－제1부：연마재로 마찰 세정된 표면 측정용 ISO 표면 조도 비교 측정기에 대한 시방서와 정의
涂料和有关产品使用前钢基体的制备喷砂清理钢基体的表面粗糙度特性第1部分:评定喷砂清理表面的ISO表面轮廓比较仪的规范和定义

KS M ISO 8503-1

도료와 관련 제품의 도장 전 철강 소지 표면처리 — 블라스트 세정된 철강 소지의 표면 거칠기 특성 — 제1부: 연마재로 블라스트 세정된 표면 측정용 ISO 표면 조도 비교 측정기에 대한 시방서와 정의
涂料和相关产品使用前钢衬底的制备.喷砂清理钢衬底的表面粗糙度特性.第1部分:评定喷砂清理表面的ISO表面轮廓比较器的规范和定义

ISO 8503-1-2012

Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
涂料和相关产品使用前钢衬底的制备——喷砂清理钢基体的表面粗糙度特性第1部分:评估喷砂清理表面的ISO表面轮廓比较仪的规范和定义

GB/T 13288.4-2013

涂覆涂料前钢材表面处理喷射清理后的钢材表面粗糙度特性第4部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法触针法
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface profi - Stylus instrument procedure

BS EN ISO 8503-2-2012

Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates-Method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure
涂料和相关产品使用前钢衬底的制备喷砂清理钢基体的表面粗糙度特性

KS M ISO 8503-3(2017 Confirm)

도료 및 관련 제품의 도장 전 철강 소지 조정－마찰 세정된 철강 소지의 표면 거칠기 특성－제3부：ISO 표면조도 비교 측정기 교정과 표면조도 측정 방법－현미경법
涂料和有关产品使用前钢基体的制备喷砂清理钢基体的表面粗糙度特性第3部分:ISO表面轮廓比较器的校准和表面轮廓的测定方法聚焦显微镜程序

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统