现行

DIN EN 2361

Aerospace series; ball-ends, double shank in corrosion resisting steel swaged on type, control cable; dimensions and loads
航空航天系列；球头 双柄 耐腐蚀钢制 锻造式 控制电缆；尺寸和荷载

1989-11-01

现行

KS W ISO 9747(2018 Confirm)

항공 우주－항공기 조종 와이어 로프에 스웨이지하는 내식강 이중 축부 볼 끝단－치수 및 하중
航空航天飞机控制钢丝绳锻造耐腐蚀钢制双柄球头尺寸和载荷

2008-05-26

现行

UNE-EN 2361-1992

AEROSPACE SERIES. BALL-ENDS, DOUBLE SHANK IN CORROSION RESISTING STEEL SWAGED ON TYPE, CONTROL CABLE. DIMENSIONS AND LOADS.
航空航天系列 球头 双柄 耐腐蚀钢锻造 控制电缆 尺寸和负载

1992-09-21

现行

BS ISO 9747-2000

Double shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
耐腐蚀钢制双柄球头 锻造在飞机控制钢丝绳上 尺寸和荷载

2001-03-15

现行

BS EN 2361-1989

Specification for ball-ends, double shank in corrosion resisting steel swaged on type, control cable. Dimensions and loads
控制电缆上锻制的耐腐蚀钢制双柄球头规范 尺寸和荷载

1989-09-29

现行

ISO 9747-2000

Aerospace — Double-shank ball-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope — Dimensions and loads
航空和航天；双柄球头 由耐腐蚀钢制成 锻造在飞机控制钢丝绳上——尺寸和荷载

2000-12-21

现行

DIN EN 2362

Aerospace series; ball-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads
航空航天系列；球头由耐腐蚀钢制成 模锻在控制电缆上；尺寸和荷载

1989-11-01

现行

KS W ISO 9748(2018 Confirm)

항공 우주－항공기 조종 와이어 로프에 스웨이지하는 내식강 볼 끝단－치수 및 하중
航空航天－飞机控制钢丝绳锻造的耐腐蚀钢制球头－尺寸和载荷

2008-05-26

现行

KS W ISO 9748(2023 Confirm)

항공 우주－항공기 조종 와이어 로프에 스웨이지하는 내식강 볼 끝단－치수 및 하중
航空航天.飞行器控制钢丝绳锻造耐腐蚀钢制球头.尺寸和载荷

2008-05-26

现行

UNE-EN 2362-1992

AEROSPACE SERIES. BALL-ENDS, IN CORROSION RESISTING STEEL SWAGED ON TYPE, CONTROL CABLE. DIMENSIONS AND LOADS.
航空航天系列 球头 由耐腐蚀钢制成 模锻在类型上 控制电缆 尺寸和负载

1992-09-21

现行

ISO 9748-2000

Aerospace — Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope — Dimensions and loads
航空和航天；球头 耐腐蚀钢制 锻造在飞机控制钢丝绳上——尺寸和荷载

2000-12-21

现行

BS EN 4156-2013

Aerospace series. Rod ends, with self-aligning double row ball bearings and threaded shank in steel. Inner ring and balls in corrosion resisting steel. Dimensions and loads. Inch series
航空航天系列 杆端 带自动调心双列滚珠轴承和钢制螺纹杆 内圈和钢球由耐腐蚀钢制成 尺寸和负载 英寸系列

2013-12-31

现行

ASD-STAN prEN 4156

Aerospace series - Rod ends, with self-aligning double row ball bearings and threaded shank in steel - Inner ring and balls in corrosion resisting steel - Dimensions and loads Inch series
航空航天系列.带自对准双列滚珠轴承和钢制螺纹杆的杆端.耐腐蚀钢制内圈和钢球.尺寸和载荷.英制系列

2010-05-10

现行

BS EN 2362-1989

Specification for ball-ends in corrosion resisting steel swaged on type, control cable. Dimensions and loads
锻制耐腐蚀钢制球头规范 尺寸和荷载

1989-10-31

现行

BS ISO 9748-2000

Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads
球头由耐腐蚀钢制成 锻造在飞机控制钢丝绳上 尺寸和荷载

2001-03-15

现行

ASD-STAN prEN 4351

Rod-ends, with self-aligning double row ball bearings and threaded shank in corrosion resisting steel - Dimensions and loads - Inch series
耐腐蚀钢制带自对准双列滚珠轴承和螺纹杆的杆端.尺寸和负载.英制系列

1997-12-31

现行

BS EN 4036-2021

Aerospace series. Rod end, adjustable, with self-aligning double row ball bearing and threaded shank, in corrosion resisting steel, reduced internal radial clearance. Dimensions and loads
航空航天系列 杆端 可调 带自对准双列滚珠轴承和螺纹杆 采用耐腐蚀钢 内部径向间隙减小 尺寸和荷载

2021-03-16

现行

BS 09/30204326 DC

BS EN 4351. Aerospace series. Rod ends, with self- aligning double row ball bearings and threaded shank in corrosion resisting steel. Dimensions and loads. Inch series
英国标准EN 4351 航空航天系列 杆端 带有自对准双列滚珠轴承和耐腐蚀钢制螺纹杆 尺寸和负载 英寸系列

2009-05-20

现行

DIN EN 2357

Aerospace series; stud-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads
航空航天系列；控制电缆上锻造的耐腐蚀钢制螺柱端部；尺寸和荷载

1989-11-01

现行

DIN EN 2358

Aerospace series; eye-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads
航空航天系列；控制电缆上的耐腐蚀钢锻制眼端；尺寸和荷载

1989-11-01