SAE MA3375E-双头螺栓耐腐蚀和耐热钢 UNS S66286 抗拉强度900 MPa 采购规范公制（稳定:2024年1月）-国家数字标准馆

现行 SAE MA3375E

到馆提醒

收藏跟踪

购买正版

Studs, Corrosion and Heat Resistant Steel, UNS S66286, Tensile Strength 900 MPa, Procurement Specification, Metric (Stabilized: Jan 2024) 双头螺栓耐腐蚀和耐热钢 UNS S66286 抗拉强度900 MPa 采购规范公制（稳定:2024年1月）

发布日期： 2024-01-22

本文件涵盖了由耐腐蚀、耐热、时效硬化铁基合金制成的公制螺柱，该合金类型在统一编号系统下被识别为UNS S66286。包括以下规格名称及其特性:

This document covers metric studs made from a corrosion and heat resistant, age hardenable iron base alloy of the type identified under the Unified Numbering System as UNS S66286. The following specification designations and their properties are covered:

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

WASHER, FLAT, COUNTERSUNK CORROSION AND HEAT RESISTANT STEEL (UNS S66286)
平头沉头耐腐蚀耐热钢垫圈（UNS S66286）

Bolts and Screws, UNS S66286, Corrosion and Heat Resistant Steel, Procurement Specification, Metric
螺栓和螺钉 UNS S66286 耐腐蚀和耐热钢采购规范公制

STUD - STRAIGHT, RING LOCKED, CORROSION AND HEAT RESISTANT STEEL (UNS S66286),.3125-18 UNJC X.3125-24 UNJF
螺柱-直形、环锁、耐腐蚀和耐热钢（UNS S66286） .3125-18 UNJC X.3125-24 UNJF

STUD - STRAIGHT, RING LOCKED, CORROSION AND HEAT RESISTANT STEEL (UNS S66286),.1900-24 UNJC X.1900-32 UNJF
螺柱-直形、环锁、耐腐蚀和耐热钢（UNS S66286） .1900-24 UNJC X.1900-32 UNJF

PIN, STRAIGHT, HEADLESS, DOWEL - CORROSION AND HEAT RESISTANT STEEL (UNS S66286), STANDARD AND OVERSIZE
标准型和超大型耐腐蚀耐热钢（UNS S66286）无头直销钉

Rivets, UNS S66286, Steel, Corrosion and Heat Resistant, 80 ksi Shear Strength, Procurement Specification for
UNS S66286钢制80 ksi抗剪强度耐腐蚀耐热铆钉采购规范

STUD - STRAIGHT, RING LOCKED, CORROSION AND HEAT RESISTANT STEEL (UNS S66286),.2500-20 UNJC-3A X.2500-28 UNJF-3A
螺柱-直形、环锁、耐腐蚀和耐热钢（UNS S66286） .2500-20 UNJC-3A X.2500-28 UNJF-3A

BOLT, MACHINE - HEXAGON HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL UNS S66286,.1900-32UNJF-3A
耐腐蚀和耐热钢unss66286、.1900-32unxf-3A机器六角头PD柄螺栓

Studs, Steel, UNS S66286 Tensile Strength 130 ksi 1800 °F Solution Heat Treated, Aged Before Roll Threading Procurement Specification
UNS S66286拉伸强度130 ksi 1800°F固溶热处理、轧前老化钢制螺柱螺纹采购规范

BOLT, MACHINE - HEXAGON HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286,.4375-20 UNJF-3A
机用六角头螺栓 PD柄耐腐蚀和耐热钢 UNS s6286 .4375-20 unxf-3A

BOLT, MACHINE - HEXAGON HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL UNS S66286,.2500-28 UNJF-3A
耐腐蚀和耐热钢uns66286、.2500-28 ungf-3A机器六角头PD柄螺栓

BOLT, MACHINE - HEXAGON HEAD, PD, SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286,.3750-24 UNFJ-3A
机械六角头螺栓 PD 柄耐腐蚀和耐热钢 UNS s62686 .3750-24 UNFJ-3A

BOLT, MACHINE - HEXAGON HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286,.3125-24 UNJF-3A
机用六角头螺栓 PD柄耐腐蚀和耐热钢 UNS S66286 .3125-24 unxf-3A

SCREW, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN,.1640-36 UNJF-3A
机用六角头全柄耐腐蚀耐热钢螺钉 UNS s6286 130 KSI MIN .1640-36 ungf-3A

BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN,.3125-24 UNJF-3A
机械螺栓-耐腐蚀耐热钢全柄六角头螺栓 UNS S66286 最小130 KSI .3125-24 UNJF-3A

BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN,.1380-40 UNJF-3A
机械螺栓-耐腐蚀耐热钢全柄六角头螺栓 UNS S66286 最小130 KSI .1380-40 UNJF-3A

BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN,.4375-20 UNJF-3A
耐腐蚀和耐热钢机用六角头螺栓 UNS s6286 130 KSI MIN .4375-20 ungf-3A

BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN,.2500-28 UNJF-3A
机械螺栓-耐腐蚀耐热钢全柄六角头螺栓 UNS S66286 最小130 KSI .2500-28 UNJF-3A

BOLT, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN,.5000-20UNJF-3A
机械螺栓-耐腐蚀耐热钢加长垫圈头双六角螺栓 UNS S66286 最小130 KSI .5000-20UNJF-3A

BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN,.5625-18 UNJF-3A
机械螺栓-耐腐蚀耐热钢全柄六角头螺栓 UNS S66286 最小130 KSI .5625-18 UNJF-3A

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统