Glass in building - Insulating glass units - Part 5: Evaluation of conformity
建筑玻璃.中空玻璃组件.第5部分:合格评定

2010-11-24

Glass in building — Glass products for structural sealant glazing — Part 2: Assembly rules
建筑玻璃——结构密封胶玻璃用玻璃制品第2部分:装配规则

2010-11-30

Glass in building - Structural sealant glazing - Part 2: Assembly rules
建筑玻璃.结构密封胶玻璃.第2部分:装配规则

2010-10-13

Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration.
建筑玻璃.中空玻璃组件.第2部分:长期试验方法和透湿要求

2003-03-14

Glass in Building - Design and construction rules - Part 2: Linearly supported glazings
建筑玻璃.设计和施工规则.第2部分:线性支撑嵌装玻璃

2020-05-01

Glass in buildings - Insulating glass — Part 2: Chemical fogging tests
建筑物用玻璃.绝缘玻璃.第2部分:化学雾化试验

2008-09-29

Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
建筑玻璃.结构和/或抗紫外线密封剂的产品标准（与结构密封剂玻璃和/或带外露密封件的中空玻璃装置一起使用）

2010-11-24

Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests.
建筑玻璃.中空玻璃装置.第6部分:工厂生产控制和定期试验

2002-11-25

Glass in building - Insulating glass units - Part 1: Generalities, dimensional tolerances and rules for the system description
建筑玻璃.中空玻璃部件.第1部分:概述 尺寸公差和系统描述规则

2006-04-19

Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals.
建筑玻璃.中空玻璃部件.第4部分:边缘密封件物理特性的试验方法

2002-11-20

中空玻璃间隔条 第2部分：不锈钢间隔条
Spacer for insulating glass units-Part 2: Stainless steel spacer

2018-04-30

Glass in building — Forced-entry security glazing — Part 2: Test and classification by repetitive impact of a hammer and axe at room temperature
建筑玻璃——强制进入安全玻璃第2部分:室温下用锤子和斧头重复撞击的试验和分类

2005-06-22

Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances.
建筑玻璃.中空玻璃装置.第3部分:气体泄漏率和气体浓度公差的长期试验方法和要求

2003-03-07

BS ISO 1288-2. Glazing in building. Determination of the bending strength of glass. Part 2. Coaxial double-ring rest on flat specimens with large test surface areas
BS ISO 1288-2 建筑玻璃 玻璃弯曲强度的测定 第二部分 大试验表面积扁平试样上的同轴双环支架

2007-08-10