本文件规定了使用剪切试验装置测量面内剪切的方法 连续纤维增强塑料的应力/剪切应变响应、剪切模量和剪切强度 纤维取向为0°和0°/90°的复合材料。 该方法适用于由单向材料制成的热固性和热塑性基体层压板 层/无纺布和/或织物，包括单向织物，纤维取向为 与试样轴成0°和0°/90°，其中，层叠对称且平衡于试样中心- 飞机 该方法适用于确定线性和非线性荷载变形下的剪切特性 即使在剪切应变大于5%的情况下也会出现这种变化。 短纤维和长纤维增强塑料复合材料也可以使用本文件进行测试。交叉引用:ISO 2818ISO 1268（所有部分）ISO 291ISO 12781-1ISO 7500-1ISO 2602ISO 16012DIN 53399DIN 863-1ISO 2812（所有部分）ISO 14129包含以下内容:勘误表，2019年10月

This document specifies a method using a shear test apparatus for measuring the in-plane shear stress/shear strain response, shear modulus and shear strength of continuous-fibre-reinforced plastic composite materials with fibre orientations of 0° and 0°/90°. This method is applicable to thermoset and thermoplastic matrix laminates made from unidirectional layers/non-woven fabrics and/or fabrics including unidirectional fabrics, with the fibres oriented at 0° and 0°/90° to the specimen axis, where the lay-up is symmetrical and balanced about the specimen mid-plane. The method is suitable for determining shear properties in both the linear and nonlinear loaddeformation range even at shear strains greater than 5 %. Short and long fibre-reinforced plastic composites can also be tested using this document.Cross References:ISO 2818ISO 1268 (all parts)ISO 291ISO 12781-1ISO 7500-1ISO 2602ISO 16012DIN 53399DIN 863-1ISO 2812 (all parts)ISO 14129Incorporates the following:Corrigendum, October 2019