IEC 62717:2014+A1:2015规定了LED模块的性能要求，以及证明符合本标准所需的测试方法和条件。第一版取消并取代了2011年发布的IEC PAS 62717。本版构成技术修订版。此版本包括以下与IEC PAS 62717相关的重大技术变更: -所有术语和定义均符合IEC 62504和相关标准 CIE文件。例如，像“额定值”这样的一般术语是 转移至IEC 62504。 -包括关于人群适用性的声明。 -完成规范性参考文献并从标准中清除 没有使用的。 -关于EMC，给出了谐波电流的参考。 -对标准大部分部分有影响的变更为 失效机制分为突然失效和发光失效 通量折旧。因此，新的术语和定义，新的 管腔维护和全新结构的要求以及 介绍了附录C的内容。 -进行从tpmax到tprated的转换，背景是不存在一个tpmax，而是结合寿命选择tp(额定)值。 -标记位置（产品、包装、数据表）为 由于故障机制的分裂， 列出了新参数。此外，耐力测试的变化 （温度的上升速度）反映在标记中。 -位移因子代替功率因数的概念是 介绍。这导致了新的定义、要求和附件E 和F。 -对发光功效的要求发生了变化。-与家庭概念相关的要求是 已审核。 -删除基于置信区间的统计数据。这个 关注LED模块功率和发光的要求和限制 附件E的通量和删除。 -引入了管腔维护的新要求。 -作为耐久性测试的一部分，在 加速运行寿命测试现在是固定的。 -关于型式试验和样本量的讨论， 测试样品中的件数急剧减少，见表 7. -关于测量方法的附件A完全重组，并且 审查，例如环境温度和缩短 进行后续光输出时的稳定时间 测量。 -对于电特性，老化时间可以选择为 500小时。 -对于光度数据文件格式，参考IEC 62722-1. -纠正了光度编码（附录D）中的错误。 -删除关于优化测试持续时间的附件G；相反，INF 表应公布。 -从灯具标准中，新的附录H“测试设备 温度测量”接管。 -最后，更新参考书目。 本合并版本由第一版（2014年）组成 及其修正案1（2015）。因此，无须在 本出版物的补充。

IEC 62717:2014+A1:2015 specifies the performance requirements for LED modules, together with the test methods and conditions, required to show compliance with this standard. This first edition cancels and replaces IEC PAS 62717 published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC PAS 62717:
- all terms and definitions are aligned with IEC 62504 and relevant documents of CIE. For example, general terms like "rated value" are shifted to IEC 62504.
- a statement on the applicability on a population is included.
- the normative references are completed and cleaned from standards that are not in use.
- with regard to EMC, references to harmonic currents are given.
- the change, which has an effect on most parts of the standard, is the split of failure mechanisms into abrupt failures and luminous flux depreciation. Consequently, new terms and definitions, new requirements for lumen maintenance and a complete new structure and contents of Annex C are introduced.
- transition from t_pmax to t_prated is made, with the background that there is not one t_pmax, but a choice of t_p(rated) values, in combination with lifetime.
- places where to mark (product, packaging, data sheets) are changed, and as a consequence of the split of failure mechanisms, new parameters are listed. Further, changes in the endurance test (ramping speed of temperature) are reflected in marking.
- the concept of displacement factor instead of power factor is introduced. This led to new definitions, requirements and Annexes E and F.
- the requirements on luminous efficacy are changed.
- the requirements, associated with the family concept are reviewed.
- statistics, based on confidence intervals are removed. This concerns requirements and limits for LED module power and luminous flux and deletion of Annex E.
- new requirements for lumen maintenance are introduced.
- as part of the endurance test, the maximum light decrease after accelerated operation life test is now fixed.
- with regard to the discussion on type test and sample size, the number of pieces in a test sample is drastically reduced, see Table 7.
- Annex A on measuring methods is completely restructured and reviewed, for example for ambient temperature and for shortening of stabilisation time when conducting subsequent light output measurements.
- for electrical characteristics, the ageing time may be chosen as 500 h.
- for photometric data file formats, reference is given to IEC 62722-1.
- mistakes in the photometric code (Annex D) are corrected.
- Annex G on optimised test duration is removed; instead, an INF sheet shall be published.
- from the luminaire standard, a new Annex H on "Test equipment for temperature measurement" is taken over.
- finally, the Bibliography is updated. This consolidated version consists of the first edition (2014) and its amendment 1 (2015). Therefore, no need to order amendment in addition to this publication.