高温连杆式切断蝶阀
High temperature lever shut-off butterfly valve

2007-01-25

电站用高温高压平板闸阀
High temperature and/or high pressure parallel slide gate valve for steam power plant

2020-04-16

Смеси формовочные и стержневые. Метод определения предела прочности при сжатии при высоких температурах
成型和芯砂混合物 高温下抗压强度极限的测定方法

Methods of Measuring the Solubility and Viscosity of Lubricating Oil/Refrigerant Mixtures at High Discharge Pressures and Temperatures
在高排放压力和温度下测量润滑油/制冷剂混合物溶解度和粘度的方法

高温硬密封单闸板切断闸阀技术条件
Technical specifications for high temperature hard sealing and shutoff single gate valve

2017-11-07

VALVE, OXYGEN, HELIUM AND HELIUM OXYGEN MIXTURE, HIGH PRESSURE FOR GAS SERVICES (SUPERSEDING MIL-V-24439)
气体用高压氧、氦和氦氧混合物阀门（替代MIL-V-24439）

1984-03-14

VALVES, OXYGEN, HELIUM AND HELIUM OXYGEN MIXTURE, HIGH PRESSURE FOR GAS SERVICES(SUPERSEDING QPL-24439-11)
气体用高压氧、氦和氦氧混合物阀门（代替QPL-24439-11）

2006-10-23

Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
高温设备用热等静压合金钢法兰、配件、阀门和零件的标准规范

2023-05-01

Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
高温设备用热等静压不锈钢法兰、配件、阀门和零件的标准规范

2023-05-01

Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
用于高温服务的锻制或轧制合金和不锈钢管法兰 锻制配件以及阀和零件的标准规范

2024-10-15

Standard Specification for Forged or Rolled Nickel Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service
腐蚀性高温设备用锻制或轧制镍合金管法兰、锻制配件、阀门和零件的标准规范

2018-11-01

VALVE, CYLINDER, GAS: HIGH PRESSURE, FLAMMABLE OR TOXIC MIXTURES, OUTLET 350 (PRESSURES THROUGH 3000 PSIG (20680 KPA) AT 120 DEG. F(48.9 DEG. C)) (SUPERSEDING MIL-DTL-2/70)
气体气瓶阀:高压、易燃或有毒混合物 出口350（120华氏度（48.9摄氏度）下压力超过3000磅/平方英寸（20680千帕））（取代MIL-DTL-2/70）

2002-09-25

VALVE, CYLINDER, GAS: HIGH PRESSURE, TOXIC AND OXIDIZING MIXTURES, OUTLET 660 (PRESSURES THROUGH 3000 PSIG (20680 KPA) AT 120 DEG. F (48.9 DEG. C)) (SUPERSEDING MIL-DTL-2/71)
气体气瓶阀门:高压有毒和氧化性混合物 出口660（120华氏度（48.9摄氏度）下压力超过3000 PSIG（20680千帕））（取代MIL-DTL-2/71）

2002-09-25

VALVE, CYLINDER, GAS: HIGH PRESSURE, FLAMMABLE OR TOXIC MIXTURES, OUTLET 350 (PRESSURES THROUGH 3000 PSIG (20680 KPA) AT 120 DEG. F(48.9 DEG. C)) (SUPERSEDING MIL-DTL-2/70)
气瓶阀门:高压、易燃或有毒混合物 出口350（120华氏度（48.9摄氏度）时压力达到3000磅/平方英寸（20680千帕））（代替MIL-DTL-2/70）

2006-09-29

VALVE, CYLINDER, GAS: HIGH PRESSURE, TOXIC AND OXIDIZING MIXTURES, OUTLET 660 (PRESSURES THROUGH 3000 PSIG (20680 KPA) AT 120 DEG. F (48.9 DEG. C)) (SUPERSEDING MIL-DTL-2/71)
阀门 气缸 气体:高压 有毒和氧化混合物 出口660（在120°F（48.9℃）下通过3000PSIG（20680KPA）的压力）（取代MIL-DTL-2/71）

2006-09-29