1.1 本试验方法包括测定碳和石墨制品的体积密度至少为500 毫米 3. 体积体积密度的计算精度为0.25 %, 使用25℃空气中的质量和尺寸测量 °C±5 °C。 1.2 以国际单位制表示的数值应视为标准值。本标准不包括其他计量单位。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 通过本试验方法测定的体积密度是碳和石墨制造和应用中重要的基本材料特性。 4.2 该测试方法可用于质量和过程控制、材料表征和描述以及其他目的。

1.1 This test method covers the determination of the bulk density of manufactured articles of carbon and graphite of at least 500 mm 3 volume. The bulk density is calculated to an accuracy of 0.25 %, using measurements of mass and dimensions in air at 25 °C ± 5 °C. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 Bulk density as determined by this test method is a basic material property of importance in manufacturing and application of carbon and graphite. 4.2 This test method can be used for quality and process control, material characterization and description, and other purposes.