BS EN 61180:2016适用于:直流电压下的介电试验；交流电压介电试验；冲击电压介电试验；用于低压设备介电测试的测试设备。本标准仅适用于额定电压不超过 1 kV交流或1.5 kV直流。本标准适用于承受高电压的物体的型式试验和常规试验 技术委员会规定的电压试验。测试设备包括电压发生器和测量系统。 这个标准 包括测试设备，其中测量系统受到外部保护 通过适当屏蔽进行干扰和耦合，例如连续导电 盾因此，简单的对比测试足以确保有效的结果。本标准不适用于电气或电气设备的电磁兼容性试验 电子设备。交叉引用:IEC 60060-1:2010EN 60060-1:2010IEC 60060-2:2010EN 60060-2:2011IEC 60068-1:2013EN 60068- 1:2014IEC 60335EN 60335IEC 60664-1:2007EN 60664-1:2007IEC 61083-1:2001IEC 61083-2:2013EN 61083-2:2013ISO/IEC指南98-3:2008GUM:1995IEC 61000-4-5:2014IEC 61010-1EN 61010-1IEC 61010-2-030:2010EN 61010-2-030:2010购买本文件时可提供的所有现行修订版均包括在购买时。

BS EN 61180:2016 is applicable to:dielectric tests with direct voltage;dielectric tests with alternating voltage;dielectric tests with impulse voltage;test equipment used for dielectric tests on low-voltage equipment.This standard is applicable only to tests on equipment having a rated voltage of not more than 1 kV a.c. or 1,5 kV d.c.This standard is applicable to type and routine tests for objects which are subjected to high voltage tests as specified by the technical committee.The test equipment comprises a voltage generator and a measuring system. This standard covers test equipment in which the measuring system is protected against external interference and coupling by appropriate screening, for example a continuous conducting shield. Therefore, simple comparison tests are sufficient to ensure valid results.This standard is not intended to be used for electromagnetic compatibility tests on electric or electronic equipment.Cross References:IEC 60060-1:2010EN 60060-1:2010IEC 60060-2:2010EN 60060-2:2011IEC 60068-1:2013EN 60068-1:2014IEC 60335EN 60335IEC 60664-1:2007EN 60664-1:2007IEC 61083-1:2001EN 61083-1:2001IEC 61083-2:2013EN 61083-2:2013ISO/IEC Guide 98-3:2008GUM:1995IEC 61000-4-5:2014EN 61000-4-5:2014IEC 61010-1EN 61010-1IEC 61010-2-030:2010EN 61010-2-030:2010All current amendments available at time of purchase are included with the purchase of this document.