IEC 60335-2-108:2024作为IEC 60335-2-108:2024 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。 IEC 60335-2-108:2024 EXV包含国际标准及其扩展版本(EXV)。IEC官方标准的扩展版本仅提供英文版本，为用户提供了标准的全面内容。IEC 60335-2-108:2024 EXV包括参考IEC 60335-1:20 20的内容。 IEC 60335-2-108:2024涉及产生低粘度离子化液体的电解槽的安全性，这些液体旨在用作家用和类似用途的电器中的无洗涤剂洗涤水，并且符合适用于此类电器的标准。它适用于在正常使用中可能出现的最恶劣条件下单独测试的电解槽，其额定电压不超过250 V，包括直流（DC）供电的电器和电池供电的电器。 可以包含电解槽的设备的示例有: -洗碗机(IEC 60335-2-5)； -洗衣机(IEC 60335-2-7)； -产生用于卫生目的的洗涤水的器具。 本标准不取代与使用电解槽的特定设备相关的标准的要求。然而，如果所使用的电解槽符合本标准，则在特定电器或组件中，特定电器标准中规定的电解槽测试可能是不必要的。如果电解槽控制系统与特定设备控制系统相关联，则可能需要对最终设备进行额外测试。资料性附件BB中给出了考虑纳入使用电解槽的设备最终产品标准的附加要求指南。 提请注意以下事实: -对于拟用于车辆或船舶或飞机上的器具，可能需要附加要求； -在许多国家，国家卫生当局、负责劳动保护的国家当局、国家供水当局和类似当局规定了额外的要求。 本标准不适用于 -专供工业用途的器具； -拟在有特殊条件的地方使用的器具，例如存在腐蚀性或爆炸性环境（灰尘、蒸汽或气体）。这第二版取消并取代了2008年出版的第一版。本版构成技术修订版。 与上一版相比，此版本包括以下重大技术变更: a)文本已与IEC 60335-1:20 20保持一致； b)一些注释已转换为规范性文本（第1条，22.012）； c)已经介绍了测试探针19的应用(8.1.1、20.2、B22.3、B22.4)； d)增加外部可接近的表面温度(条款11)。 本第2部分应与最新版本的IEC 60335-1:20 20及其修订结合使用，除非该版本排除了本第2部分；在这种情况下，使用不排除它的最新版本。它是在该标准第六版（2020年）的基础上建立的。

IEC 60335-2-108:2024 is available as IEC 60335-2-108:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60335-2-108:2024 EXV contains both the international standard and its extended version (EXV). This extended version of the official IEC Standard is available in English only and provides the user with a comprehensive content of the Standard. IEC 60335-2-108:2024 EXV includes the content of the references made to IEC 60335-1:2020.

IEC 60335-2-108:2024 deals with the safety of electrolysers that produce low viscosity, ionized liquids intended for use as detergent free wash water in appliances for household and similar purposes and which conform with the standards applicable to such appliances. It applies to electrolysers tested separately, under the most severe conditions that can be expected to occur in normal use, their rated voltage being not more than 250 V including direct current (DC) supplied appliances and battery-operated appliances.
Examples of appliances that can contain electrolysers are:
- dishwashers (IEC 60335-2-5);
- washing machines (IEC 60335-2-7);
- appliances producing wash water for hygiene purposes.
This standard does not supersede the requirements of standards relevant to the particular appliance in which the electrolyser is used. However, if the electrolyser used complies with this standard, the tests for the electrolyser specified in the particular appliance standard can be unnecessary in the particular appliance or assembly. If the electrolyser control system is associated with the particular appliance control system, additional tests can be necessary on the final appliance. Guidance for additional requirements to be considered for inclusion in the end product standards for appliances that use electrolysers is given in informative Annex BB.
Attention is drawn to the fact that:
- for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements can be necessary;
- in many countries, additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities.
This standard does not apply to
- appliances intended exclusively for industrial purposes;
- appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).
This second edition cancels and replaces the first edition published in 2008. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the text has been aligned with IEC 60335-1:2020;
b) some notes have been converted to normative text (Clause 1, 22.012);
c) application of test probe 19 has been introduced (8.1.1, 20.2, B22.3, B22.4);
d) addition of external accessible surface temperatures (Clause 11).
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1:2020 and its amendments unless that edition precludes it; in that case, the latest edition that does not preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.