本文件规定了设备的特性、试验方法、鉴定和验收条件 铝或铜包导线的通用单芯和多芯电缆 铝，用于安装在飞机电气系统中。 这些电缆的绝缘设计用于承受频率不超过 2000赫兹。除非个别产品标准另有规定，否则最大额定电压 这些电缆中，交流115 V rms相对中性线，200 V rms相对相和28 Vdc。 它们被分为不同的类型，其特征在产品标准中给出。除非 除产品标准另有规定外，本标准中规定的试验适用。交叉引用:EN 3838EN 4651EN 3475-100EN 9133TR 4648ISO 2574EN 4681-002EN 3719购买本文件时可获得的所有现行修订均包含在购买本文件中。

This document specifies the characteristics, test methods, qualification and acceptance conditions of single and multicore electric cables for general purpose with conductors in aluminium or copper-clad aluminium, intended for installation in aircraft electrical systems. The insulation of these cables is designed to withstand aircraft voltages at a frequency not exceeding 2 000 Hz. Unless specified by individual product standards the maximum demonstrated voltage of rating of these cables is ac 115 V rms phase to neutral and 200 V rms phase to phase and 28 Vdc. They are divided into types, the characteristics of which are given in the product standards. Unless otherwise specified in the product standard, the tests defined in this standard apply.Cross References:EN 3838EN 4651EN 3475-100EN 9133TR 4648ISO 2574EN 4681-002EN 3719All current amendments available at time of purchase are included with the purchase of this document.