IEC 61076-3-103:2003-电子设备连接器第3-103部分:矩形连接器 - 具有不可拆卸带状电缆接头的单列连接器详细规格用于高速串行数据（hssdc）的1,25 Mm间距-国家数字标准馆

现行 IEC 61076-3-103:2003

到馆阅读

收藏跟踪

购买正版

选择购买版本本服务由中国标准服务网提供

电子版

英语+法语/电子版加密PDF格式/约1分钟可下载/有水印/要装插件FileOpen/电脑需联网/限制累计3台电脑共打印5次

¥ 2,395

电子版

未知语种/电子版加密PDF格式/约1分钟可下载/有水印/要装插件FileOpen/电脑需联网/限制累计3台电脑共打印5次

¥ 2,395

更多

前往中国标准服务网获取更多购买信息

Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) 电子设备连接器第3-103部分:矩形连接器 - 具有不可拆卸带状电缆接头的单列连接器详细规格用于高速串行数据（hssdc）的1,25 Mm间距

发布日期： 2003-11-28

                为一系列具有以下特征的连接器制定统一规范、测试要求和质量评估程序:屏蔽矩形配合接口、单排触点间距1.25 mm、8个位置，用于线对板应用。

Establishes uniform specifications, testing requirements and quality assessment procedures for a family of connectors with the following characteristics: shielded, rectangular-shaped mating interface, 1,25 mm pitch spacing of contacts on a single row, 8 positions, for wire-to-board applications.

分类信息

发布单位或类别：国际组织-国际电工委员会

ICS分类： 31.220.10电子电信设备用机电元件 - 插头和插座装置、连接器

关联关系

研制信息

归口单位： TC 48/SC 48B

相似标准/计划/法规

IEC 61076-3-2008

Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification
电子设备连接器 - 产品要求 - 第3部分:矩形连接器 - 分段规格

DIN EN 61076-3-103

Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1.25 mm pitch used for high speed serial data (HSSDC) (IEC 61076-3-103:2003); German version EN 61076-3-103:2004
电子设备连接器.第3-103部分:矩形连接器.高速串行数据（HSSDC）用1.25mm间距不可拆卸带状电缆触点的单行连接器详细规范（IEC 61076-3-103-2003）；德文版EN 61076-3-103:2004

IEC 61076-3-001-2008

Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification
电子设备用连接器产品要求第3-001部分:矩形连接器空白详细规范

IEC 61076-3-112-2006

Connectors for electronic equipment - Part 3-112: Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/ video equipment
电子设备连接器 - 第3-112部分:矩形连接器 - 具有四个触点的矩形连接器的详细规格用于消费类音频/视频设备的高性能串行总线

BS 03/100531 DC

IEC 61076-3-001. Ed.2.0. Connectors for electronic equipment. Part 3-001. Rectangular connectors. Blank detail specification
IEC 61076-3-001 Ed.2.0 电子设备用连接器第3-001部分矩形连接器空白详细规范

DIN EN 61076-3-112

Connectors for electronic equipment - Part 3-112: Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/video equipment (IEC 61076-3-112:2006); German version EN 61076-3-112:2006
电子设备连接器.第3-112部分:矩形连接器.消费音频/视频设备用高性能串行总线用四触点矩形连接器详细规范（IEC 61076-3-112-2006）；德文版EN 61076-3-112:2006

IEC 61076-3-118-2010

Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling
电子设备用连接器产品要求第3-118部分:矩形连接器带推挽耦合的4极加PE电源连接器的详细规范

IEC 61076-3-126-2023

Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5-way power connectors for industrial environments with push-pull locking
电气和电子设备用连接器.产品要求.第3-126部分:矩形连接器.具有推拉锁定的工业环境用5路电源连接器的详细规范

IEC 61076-3-120-2016

Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
电子设备连接器 - 产品要求第3-120部分:矩形连接器 - 具有250 V直流额定电压的快速锁定的可重复电源连接器的详细规范额定电流30 a

IEC 61076-3-123-2019

Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking
电气和电子设备用连接器.产品要求.第3-123部分:矩形连接器.带推拉锁定的工业环境用电源和光纤数据传输用混合连接器的详细规范

DIN EN 61076-3-118

Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole + PE power connector with push-pull coupling (IEC 61076-3-118:2010); German version EN 61076-3-118:2010
电子设备连接器.产品要求.第3-118部分:矩形连接器.带推拉耦合的4极+PE电源连接器详细规范（IEC 61076-3-118-2010）；德文版EN 61076-3-118:2010

DIN IEC 61076-3-118-DRAFT

Draft Document - Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors: Detail specification for a 4 poles + PE power connector with push-pull coupling (IEC 48B/1876/CD:2008)
文件草稿.文件草稿.电子设备连接器.产品要求.第3-118部分:矩形连接器:带推挽耦合的4极+PE电源连接器详细规范（IEC 48B/1876/CD:2008）

IEC 61076-3-124-2019

Connectors for electrical and electronic equipment - Product requirements – Part 3-124: Rectangular connectors – Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz
电气和电子设备用连接器.产品要求.第3-124部分:矩形连接器.频率高达500MHz的输入/输出和数据传输用10路屏蔽自由和固定连接器详细规范

IEC 61076-3-106-2023

Connectors for electrical and electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface
电气和电子设备用连接器.产品要求.第3-106部分:矩形连接器.与IEC 60603-7系列接口的工业环境用8路屏蔽和非屏蔽连接器一起使用的保护外壳的详细规范

DIN EN IEC 61076-3-123

Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking (IEC 61076-3-123:2019); German version E
电气和电子设备用连接器.产品要求.第3-123部分:矩形连接器.电源和光纤数据传输用推拉锁定工业环境混合连接器详细规范（IEC 61076-3-123-2019）；德语版E

DIN EN 61076-3-120

Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A (IEC 61076-3-120:2016); German version EN 61076-3-120:2016
电子设备用连接器.产品要求.第3-120部分:矩形连接器.额定电压为250V d.c.和额定电流为30A的带卡锁的可拆线电源连接器详细规范（IEC 61076-3-120-2016）；德文版EN 61076-3-120:2016

DIN EN IEC 61076-3-106-DRAFT

Draft Document - Connectors for electrical and electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interf
文件草稿.电气和电子设备用连接器.产品要求.第3-106部分:矩形连接器.与工业环境用8路屏蔽和非屏蔽连接器一起使用的防护外壳详细规范

DIN EN IEC 61076-3-119

Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz
电气和电子设备用连接器.产品要求.第3-119部分:矩形连接器.频率高达100MHz的数据传输用工业环境用带推拉耦合的屏蔽和非屏蔽、自由和固定10路连接器详细规范

IEC 61076-3-119-2017

Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and？unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz
电气和电子设备用连接器.产品要求.第3-119部分:矩形连接器.频率高达100MHz的数据传输用工业环境用带推拉耦合的屏蔽和非屏蔽、自由和固定10路连接器详细规范

BS 06/30148023 DC

IEC 61076-3-115. Connectors for electronic equipment. Part 3-115. Rectangular connectors. Protective housings for use with 8-way shielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 12related to IEC 61076-3-106. Push-pu
IEC 61076-3-115 电子设备用连接器第3-115部分矩形连接器与8路屏蔽连接器一起使用的防护外壳适用于包含IEC 60603-7系列接口的工业环境频率高达600 MHz 变体12与IEC 61076-3-106相关推浦

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统