BS EN ISO 10893-12:2011+A1:2020-钢管的无损检测-国家数字标准馆

现行 BS EN ISO 10893-12:2011+A1:2020

到馆提醒

收藏跟踪

购买正版

Non-destructive testing of steel tubes-Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes 钢管的无损检测

发布日期： 2020-06-24

ISO 10893的本部分规定了无缝钢管和焊接钢管（埋弧焊（SAW）钢管除外）壁厚测量的自动全周边超声波检测要求。它规定了测试方法和相应的校准程序。购买本文件时可获得的所有当前修订均包含在购买本文件中。

This part of ISO 10893 specifies requirements for the automated full peripheral ultrasonic testing of seamless and welded steel tubes, with the exception of submerged arc-welded (SAW) tubes, for wall thickness measurement. It specifies the testing method and corresponding calibration procedures.All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

KS B ISO 10893-12

강관의 비파괴검사 — 제12부: 이음매 없는 강관과 용접 (서브머지드 아크 용접 제외) 강관의전 원주면 자동화 초음파 두께 검사
钢管无损检测的测试 - 第12部分:无缝和焊接（埋弧焊除外）钢管的自动全周超声波测厚

KS B ISO 10893-12

강관의 비파괴검사 — 제12부: 이음매 없는 강관과 용접(서브머지드 아크 용접 제외) 강관의 전 원주면 자동 초음파 두께 검사
钢管无损检测第12部分:无缝钢管和焊接钢管（埋弧焊除外）全周超声波厚度自动检测

ISO 10893-12-2011

Non-destructive testing of steel tubes — Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
钢管无损检测Spart 12:无缝钢管和焊接钢管（埋弧焊除外）的全周边自动超声波厚度检测

BS EN ISO 10893-10-2011+A1-2020

Non-destructive testing of steel tubes-Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
钢管的无损检测

UNE-EN 10246-6-2000

NON-DESTRUCTIVE TESTING OF STEEL TUBES. PART 6: AUTOMATIC FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS STEEL TUBES FOR THE DETECTION OF TRANSVERSE IMPERFECTIONS.
钢管的无损检测第6部分:检测横向缺陷用无缝钢管的自动全周边超声波检测

BS EN ISO 10893-3-2011+A2-2020

Non-destructive testing of steel tubes-Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections
钢管的无损检测

KS B ISO 10893-10

강관의 비파괴검사 — 제10부: 종방향 및/또는 횡방향 불완전부를 검출하기 위한 이음매 없는 강관과 용접(서브머지드 아크 용접 제외) 강관의 자동화 전 원주면 초음파탐상검사
钢管无损检测的测试 - 第10部分:无缝和焊接钢管的自动全周超声检测（除埋弧焊）用于检测纵向和/或横向缺陷

KS B ISO 10893-10

강관의 비파괴검사 — 제10부: 종방향 및/또는 횡방향 불완전부를 검출하기 위한 이음매 없는 강관과 용접(서브머지드 아크 용접 제외) 강관의 자동 전 원주면 초음파탐상검사
钢管无损检测第10部分:用于检测纵向和/或横向缺陷的无缝和焊接（埋弧焊除外）钢管的全周超声波自动检测

ISO 10893-10-2011

Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
钢管无损检测Spart 10:用于检测纵向和/或横向缺陷的无缝和焊接（埋弧焊除外）钢管的自动全周边超声波检测

BS 09/30166492 DC

BS ISO 10893-12. Non-destructive testing of steel tubes. Part 12. Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
BS ISO 10893-12 钢管的无损检测第12部分无缝和焊接（埋弧焊除外）钢管的全周向超声波自动厚度检测

ISO 10893-12-2011/Amd 1-2020

Non-destructive testing of steel tubes — Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes — Amendment 1: Change of acceptance criteria
验收标准的变更

ISO 10893-3-2011

Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections
钢管无损检测Spart 3:用于检测纵向和/或横向缺陷的无缝和焊接（埋弧焊除外）铁磁钢管的自动全周向漏磁检测

UNE-EN 10246-13-2000

Non-destructive testing of steel tubes. Part 13: Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes.
钢管的无损检测第13部分:无缝钢管和焊接钢管（埋弧焊除外）的全周向超声波自动厚度检测

GOST ISO 10893-12-2017

Трубы стальные бесшовные и сварные. Часть 12. Ультразвуковой метод автоматизированного контроля толщины стенки по всей окружности
无缝和焊接钢管第12部分全周边超声测厚的自动化方法

UNE-EN 10246-4-2000

NON-DESTRUCTIVE TESTING OF STEEL TUBES. PART 4: AUTOMATIC FULL PERIPHERAL MAGNETIC TRANSDUCER/FLUX LEAKAGE TESTING OF SEAMLESS FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF TRANSVERSE IMPERFECTIONS.
钢管的无损检测第4部分:用于检测横向缺陷的无缝铁磁钢管的自动全周边磁传感器/漏磁检测

BS 09/30166485 DC

BS ISO 10893-10. Non-destructive testing of steel tubes. Part 10. Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transversal imperfections
BS ISO 10893-10 钢管的无损检测第十部分用于检测纵向和/或横向缺陷的无缝和焊接（埋弧焊除外）钢管的自动全周边超声波检测

GB/T 32552-2016

无缝和焊接钢管（埋弧焊除外）的自动全圆周超声厚度检测
Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes

Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections
钢管无损检测.第7部分:纵向缺陷检测用无缝管和焊接管（埋弧焊除外）的全周向自动超声波检测；德文版EN 10246-7:2005

UNE-EN 10246-7-2008

Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections
钢管无损检测第7部分:纵向缺陷检测用无缝管和焊接管（埋弧焊除外）的全周向自动超声波检测

Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections; English version of DIN EN 10246-6
钢管的无损检测.第6部分:检测横向缺陷用无缝钢管的自动全周边超声波检测；德文版EN 10246-6:1999

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统