BS 09/30193187 DC-BS 2TA 49 钛铝钼锡硅合金加工用棒材和型材规范抗拉强度1000-1200兆帕超过100 mm（小于等于150 mm）的限制截面-国家数字标准馆

现行 BS 09/30193187 DC

到馆提醒

收藏跟踪

购买正版

BS 2TA 49. Specification for bar and section for machining of titanium-aluminium-molybdenumtin- silicon alloy. Tensile strength 1000-1200 MPa. Limiting ruling section over 100 mm up to and including 150 mm BS 2TA 49 钛铝钼锡硅合金加工用棒材和型材规范抗拉强度1000-1200兆帕超过100 mm（小于等于150 mm）的限制截面

发布日期： 2009-04-17

交叉引用:BS TA 100BS ISO 31-0BS ISO 1000BS TA 45BS TA 46BS TA 47BS TA 48BS TA 50BS TA 51EN 4500-1EN 4500-4购买本文件时可获得的所有现行修订均包含在购买本文件中。

Cross References:BS TA 100BS ISO 31-0BS ISO 1000BS TA 45BS TA 46BS TA 47BS TA 48BS TA 50BS TA 51EN 4500-1EN 4500-4All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

现行

BS 09/30193179 DC

BS 2TA 45. Specification for bar and section for machining of titanium-aluminium- molybdenumtin-silicon alloy. Tensile strength 1100-1280 MPa. Limiting ruling section 25 mm
BS 2TA 45 钛铝钼锡硅合金加工用棒材和型材规范抗拉强度1100-1280兆帕限制截面25毫米

2009-04-17

现行

BS 09/30193169 DC

BS 2TA 38. Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy. Tensile strength 1250-1420 MPa. Limiting ruling section 25 mm
BS 2TA 38 钛铝钼锡硅碳合金加工用棒材规范抗拉强度1250-1420兆帕限制截面25毫米

2009-04-17

现行

BS 09/30193181 DC

BS 2TA 46. Specification for bar and section for machining of titanium-aluminium-molybdenum-tin -silicon alloy. Tensile strength 1050-1220 MPa. Limiting ruling section over 25 mm up to and including 100 mm
BS 2TA 46 钛铝钼锡硅合金加工用棒材和型材规范抗拉强度1050-1220兆帕超过25 mm（小于等于100 mm）的限制截面

2009-04-17