Standard Practice for Process Step to Inactivate Rodent Retrovirus with Triton X-100 Treatment＜rangeref＞＜/rangeref ＞
用Triton X-100处理灭活啮齿动物逆转录病毒的工艺步骤的标准实施规程＜rangef＞＜/rangef＞
1.1
This practice assures effective inactivation of
≥
4 log
10
of infectious rodent retrovirus (that is, reduction from 10 000 to 1 infectious rodent retrovirus or removal of 99.99 % of infectious rodent retroviruses) in the manufacturing processes of monoclonal antibodies or immunoglobulin G (IgG) Fc fusion proteins manufactured in rodent-derived cell lines that do not target retroviral antigens. Rodent retrovirus is used as a model for rodent cell substrate endogenous retrovirus-like particles potentially present in the production stream of these proteins.
1.2
The parameters specified for this practice are clarification, Triton X-100 detergent concentration, hold time, pH, and inactivation temperature.
1.3
This practice can be used in conjunction with other clearance or inactivation unit operations that are orthogonal to this inactivation mechanism to achieve sufficient total process clearance or inactivation of rodent retrovirus.
1.4
This detergent inactivation step is performed on a clarified, cell-free intermediate of the monoclonal antibody or IgG Fc fusion protein.
1.5
The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
====== Significance And Use ======
3.1
Rodent-derived cell lines are widely used in the production of biopharmaceutical drugs such as mAbs and Fc fusion proteins. These cell lines have been shown to contain genes encoding endogenous retroviral-like particles or endogenous retrovirus. Despite the lack of evidence for an association between such rodent retroviruses and disease in humans, the potential contamination of human therapeutics raises safety concerns for biopharmaceutical drugs. Additionally, adventitious agents such as viruses can be introduced into a biopharmaceutical drug substance manufacturing process from other sources, and potential safety issues can be attributed to these potential unknowns. For these reasons, effective viral clearance is an essential aspect of an integrated approach combining safety testing and process characterization which ensures virus safety for biopharmaceutical drug products made using rodent cell lines.
3.2
Solvent/detergent inactivation has been widely used for decades to inactivate enveloped viruses in blood plasma derived biopharmaceutical therapies
(
1-
3
)
.
3
Solvent/detergent systems using the detergents Triton X-100 or Polysorbate 80 along with the organic solvent tri(n-butyl)phosphate (TNBP) have been used to inactivate enveloped viruses by disrupting the viral envelope thereby reducing the ability of the enveloped virus to attach to and then infect the host cell
(
4 and
5
)
.
3.3
Most manufacturers of mAbs, recombinant proteins, and Fc fusion proteins have focused on viral inactivation methods using the detergent Triton X-100 or Polysorbate 80 in the absence of TNBP
(
6
)
, which can interfere with subsequent bioprocessing steps. The ability of the detergents alone to inactivate retroviruses has been demonstrated in monoclonal antibodies produced in rodent-derived cell lines
(
6-
9
)
. At a 2011 workshop devoted to viral clearance steps used in bioprocessing
(
7
)
, investigators from one firm showed incubation with 0.2 % Triton X-100 for 60 min of hold time at ambient temperature inactivated >5 log
10
of X-MuLV across four separate mAbs in cell culture matrices.
3.3.1
At the same 2011 workshop
(
7
)
, investigators from a second firm confirmed that levels of protein concentration and lipid concentration had no observable effect on MuLV virus inactivation at levels of 0.3 % Triton X-100. Additionally, eight different monoclonal antibody Host Cell Culture Fluids (HCCF), were treated with 0.3 % Triton X-100 for a 60 min hold time at 20 °C. Effective inactivation,
≥
4 log
10
of inactivation of MuLV virus, was seen for each antibody in these experiments.
3.4
Quertinmont
(
8
)
demonstrated that DNA level, total protein concentration, and lipid content (exceeding 1000 µg/mL) in a 0.45 % (w/v) Triton X-100 detergent inactivation step using HCCF were not statistically significant to the detection of MuLV virus following 60 min of inactivation using both monoclonal antibodies and Fc fusion proteins. Additionally, three Design of Experiment (DOE) robustness studies were carried out for three separate molecules varying biological drug concentration, total protein concentration, temperature, and Triton X-100 concentration. These studies demonstrated effective viral inactivation when Triton X-100 concentration is
≥
0.2 %, temperature is between 15 °C to 25 °C, and hold time is
≥
60 min in HCCF.
3.5
Blumel and Tounekti
(
9
)
showed complete inactivation of MuLV across 4 mAbs [2 IgGs and 2 immunoglobulin M (IgMs)] for all time points (0, 5, 30, and 60 min) using 1.0 % Triton X-100 for a 60-min hold time. The average log reduction factor (LRF) for these 15 studies was
≥
3.89 log
10
. Analyses of the study data showed the higher level of Triton X-100 (1 %) necessitated a large dilution to mitigate cytotoxicity of the MuLV indicator cells. No detectable virus was seen at any of the time points tested across these 15 studies and the claimed LRF was completely dependent on the starting viral titer of the MuLV feed stock in these studies.
3.6
The extent of this retroviral inactivation could be dependent on certain reaction parameters including clarification, Triton X-100 concentration, hold time, pH, and inactivation temperature. However, managing parameters that give robust and effective retrovirus inactivation as specified by this practice, in conjunction with other clearance unit operations, can assure effective retroviral inactivation.
3.7
This practice incorporates parameters that give effective retrovirus inactivation, which can be used as modular validation of the viral clearance process for the specified viruses.
到馆提醒
收藏跟踪
分享链接
购买正版
分类信息
首页
馆藏资源
舆情信息
标准服务
科研活动
关于我们
️版权归中国标准化研究院所有