BS EN 4691-1:2017规定了所需的特性、检验和试验方法、鉴定和试验 带有两个可调节端部和整体螺栓的杆组件的验收条件 承受温度范围内内部和下部结构可能承受的静态和动态载荷 从-55°C到85°C。无论何时引用，都适用。交叉引用:EN 9133:2004EN 4691-2EN ISO 527-2（ISO 527-2:2012）ASEN ISO 175（ISO 175:2010）ASEN 2424:2008ISO 9001:2015ISO 1172:1996ISO 179-1:2010 Ed 2ISO 10123:2013 Ed 2EN 4693:2017ISO 37:2011 Ed 5ISO 1817:2015 ED6RTCA-DO 160EDIN 65271EN 2004-1FAR/JAR/CS 25.853EN 3844（所有部分）UL 746BEN ISO 1172ASTM E112-13ISO 178:2010 Ed 5DIN 53504:2017（G）ISO 1183- 1（ISO 1183-1:2012）ASEN ISO 9001（ISO 9001:2015）ASASASASTM D696-16EN ISO 179-1（ISO 179-1:2010）ASISO 5855-1:1999ISO 9227:2017EN 10204:2004EN 4694:2017EN ISO 178（ISO 178:2010）ASEN ISO 10964:1993（R07）ISO 175:2010 Ed 3ISO 2781:2008 Ed 4EN 4EN ISO 291（ISO 291:2008）ASEN 9100:2009EN 571-1:1997ISO 5855-2013:2013 ISO 2822:201527:ISO 2827-201527:2012（ISO 75-2:2013）ASISO 291:2008 Ed 4EN 4695:2017ISO 34-1:2015ISO 1183-1:2012EN 4692:2017购买本文件时可获得的所有当前修订均包括在购买本文件中。

BS EN 4691-1:2017 specifies the required characteristics, inspection and test methods, qualification and acceptance conditions for rod assemblies with two adjustable ends with integrated bolts, designed to withstand static and dynamic loads possible for interior and substructure in the temperature range from - 55 °C to 85 °C. It is applicable whenever referenced.Cross References:EN 9133:2004EN 4691-2EN ISO 527-2 (ISO 527-2:2012) ASEN ISO 175 (ISO 175:2010) ASEN 2424:2008ISO 9001:2015ISO 1172:1996ISO 179-1:2010 Ed 2ISO 10123:2013 ED2EN 4693:2017ISO 37:2011 Ed 5ISO 1817:2015 ED6RTCA-DO 160EDIN 65271EN 2004-1FAR/JAR/CS 25.853EN 3844 (all parts)UL 746BEN ISO 1172ASTM E112 - 13ISO 178:2010 Ed 5DIN 53504:2017 (G)EN ISO 1183-1 (ISO 1183-1:2012) ASEN ISO 9001 (ISO 9001:2015) ASASTM D696 - 16EN ISO 179-1 (ISO 179-1:2010) ASISO 5855-1:1999ISO 9227:2017EN 10204:2004EN 4694:2017EN ISO 178 (ISO 178:2010) ASISO 10964:1993 (R07)ISO 175:2010 Ed 3ISO 2781:2008 Ed 4EN ISO 291 (ISO 291:2008) ASEN 9100:2009EN 571-1:1997ISO 75-2:2013 ED3ISO 5855-2:1999EN ISO 9227:2017ASTM C177 - 13EN 2826:2011EN 2825:2011ISO 527-2:2012EN ISO 75-2 (ISO 75-2:2013) ASISO 291:2008 Ed 4EN 4695:2017ISO 34-1:2015ISO 1183-1:2012EN 4692:2017All current amendments available at time of purchase are included with the purchase of this document.