ISO 3211:2018-铝及其合金的阳极氧化 - 阳极氧化涂层对变形破裂的抗性评估-国家数字标准馆

现行 ISO 3211:2018

到馆阅读

收藏跟踪

购买正版

Anodizing of aluminium and its alloys — Assessment of resistance of anodic oxidation coatings to cracking by deformation 铝及其合金的阳极氧化 - 阳极氧化涂层对变形破裂的抗性评估

发布日期： 2018-11-28

本文件规定了评估阳极氧化涂层抗变形开裂能力的经验方法。
该方法特别适用于厚度小于5μm的阳极氧化涂层的薄板材料，并可用于开发目的。
注:如果试样较厚，可测量超过5μm的涂层（见第9条）。

This document specifies an empirical method for assessing the resistance of anodic oxidation coatings to cracking by deformation.
The method is applicable particularly to sheet material with anodic oxidation coatings of thickness less than 5 μm, and is useful for development purposes.
NOTE If the test specimen is thick, more than 5 μm of coating can be measured (see Clause 9).

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 25.220.20表面处理和镀涂 - 表面处理

关联关系

研制信息

归口单位： ISO/TC 79/SC 2

相似标准/计划/法规

BS EN ISO 3211-2018

Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation
铝及其合金的阳极氧化通过变形评估阳极氧化涂层的抗裂性

JIS H 8684-2013

Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxidation coatings to cracking by deformation
GB/T-铝及铝合金阳极氧化阳极氧化膜耐变形开裂性的评定

BS ISO 10074-2021

Anodizing of aluminium and its alloys. Specification for hard anodic oxidation coatings on aluminium and its alloys
铝及其合金的阳极氧化铝及其合金硬质阳极氧化涂层规范

Anodizing of aluminium and its alloys — Specification for hard anodic oxidation coatings on aluminium and its alloys
铝及其合金的阳极氧化 - 铝及其合金上硬阳极氧化涂层的规范

BS EN ISO 8251-2018

Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings
铝及其合金的阳极氧化阳极氧化膜耐磨性的测定

Anodizing of aluminium and its alloys — Measurement of abrasion resistance of anodic oxidation coatings
铝及其合金阳极氧化 - 阳极氧化涂层的耐磨性测量

Anodizing of aluminium and its alloys — Test method for chemical resistance of anodic oxidation coatings on aluminium and its alloys using electromotive force apparatus
铝及铝合金阳极氧化用电动势仪测定铝及其合金阳极氧化层耐化学腐蚀性的试验方法

ANODIZING OF ALUMINIUM AND ITS ALLOYS. VOCABULARY.
铝及其合金的阳极氧化词汇

BS EN ISO 2931-2018

Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
铝及其合金的阳极氧化通过导纳测量评估密封阳极氧化涂层的质量

Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
铝及其合金的阳极氧化 - 通过测量导纳度评估密封阳极氧化涂层的质量

BS ISO 7583-2013

Anodizing of aluminium and its alloys. Terms and definitions
铝及其合金的阳极氧化术语和定义

Anodizing of aluminium and its alloys — Terms and definitions
铝及其合金的阳极氧化——术语和定义

UNE-EN 12373-15-2001

Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation.
铝和铝合金.阳极氧化.第15部分:阳极氧化涂层抗变形开裂性的评定

JIS H 8683-3-2013

Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings -- Part 3: Measurement of admittance
铝及铝合金阳极氧化密封阳极氧化膜质量的评定第3部分:导纳的测量

JIS H 8687-2013

Anodizing of aluminium and its alloys -- Determination of electric strength
铝及铝合金阳极氧化电强度的测定

JIS H 8603-1999

Hard anodic oxide coatings on aluminium and its alloys
铝及其合金上的硬质阳极氧化膜

BS EN ISO 7599-2018

Anodizing of aluminium and its alloys. Method for specifying decorative and protective anodic oxidation coatings on aluminium
铝及其合金的阳极氧化铝上装饰性和保护性阳极氧化涂层的规定方法

Anodizing of aluminium and its alloys — Method for specifying decorative and protective anodic oxidation coatings on aluminium
铝及其合金的阳极氧化.铝上装饰性和保护性阳极氧化涂层的规定方法

JIS H 8682-2-2013

Anodizing of aluminium and its alloys -- Measurement of abrasion resistance of anodic oxidation coatings -- Part 2: Abrasive jet abrasion resistance test
铝及铝合金阳极氧化阳极氧化膜耐磨性的测量第2部分:磨料喷射耐磨性试验

JIS H 8682-3-2013

Anodizing of aluminium and its alloys -- Measurement of abrasion resistance of anodic oxidation coatings -- Part 3: Falling sand abrasion resistance test
铝及铝合金阳极氧化阳极氧化膜耐磨性的测定第3部分:耐落砂耐磨性试验

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统