MIL MIL-DTL-32434-高温中压缠绕式聚四氟乙烯软管总成通用规范-国家数字标准馆

现行 MIL MIL-DTL-32434

到馆提醒

收藏跟踪

购买正版

Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for 高温中压缠绕式聚四氟乙烯软管总成通用规范

发布日期： 2013-01-23

本规范包含中压、高温、缠绕聚四氟乙烯（PTFE）软管组件的要求，该软管组件由耐腐蚀钢（CRES）编织物加固，用于燃料、润滑油、水-酒精、液压和气动系统，符合本文规定的限值。

This specification contains the requirements for medium pressure, high temperature, convoluted polytetrafluoroethylene (PTFE) hose assemblies, reinforced with a corrosion-resistant steel (CRES) wire braid for use in fuel, lubricating oil, water-alcohol, hydraulics and pneumatic systems within the limits specified herein.

分类信息

发布单位或类别：美国-美国军事规范和标准

关联关系

研制信息

相似标准/计划/法规

BS ISO 7313-2020

Aircraft. High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
飞机聚四氟乙烯（PTFE）高温卷绕软管组件

BS 96/709196 DC

Aircraft. High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
飞机聚四氟乙烯（PTFE）高温卷绕软管组件

Aircraft — High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
飞机.聚四氟乙烯（PTFE）高温卷绕软管组件

Hose Assembly, Convoluted Polytetrafluoroethylene, High Temperature, Medium Pressure, Aircraft, Metric
软管组件缠绕聚四氟乙烯高温中压飞机公制

MIL MIL-DTL-32434 Notice 1-Validation 1

Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for
高温中压波纹聚四氟乙烯软管组件通用规范

Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft
飞机用高温中压波纹聚四氟乙烯金属增强软管组件

Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft Metric
飞机公制高温中压缠绕聚四氟乙烯金属增强软管组件

MIL MIL-DTL-32434/2 Notice 1-Validation 1

Hose Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flareless-to-Flareless
软管组件聚四氟乙烯波纹可重复使用的接头高温中压无扩口至无扩口

MIL MIL-DTL-32434/5 Notice 1-Validation 1

Hose Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flange-to-Flange
软管组件聚四氟乙烯波纹可重复使用的接头高温中压法兰对法兰

MIL MIL-DTL-32434/1

Hose, Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flare-to Flare
软管组件聚四氟乙烯缠绕式可重复使用配件高温中压火炬到火炬

MIL MIL-DTL-32434/2

Hose Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flareless-to-Flareless
软管组件聚四氟乙烯卷曲可重复使用配件高温中压无扩口至无扩口

MIL MIL-DTL-32434/4

Hose Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flareless-to-Flange
软管组件聚四氟乙烯卷曲可重复使用配件高温中压无扩口至法兰

MIL MIL-DTL-32434/5

Hose Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flange-to-Flange
软管组件聚四氟乙烯卷曲可重复使用配件高温中压法兰到法兰

MIL MIL-DTL-32434/3

Hose Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flare-To-Flange
软管组件聚四氟乙烯卷曲可重复使用的配件高温中压扩口到法兰

MIL MIL-DTL-32434/8 Notice 1-Validation 1

Hose, Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flare-to-Flange
软管组件聚四氟乙烯波纹永久连接配件高温中压火炬至法兰

MIL MIL-DTL-32434/7 Notice 1-Validation 1

Hose Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flareless-to-Flareless
软管总成聚四氟乙烯波纹永久连接配件高温中压无扩口至无扩口

MIL MIL-DTL-32434/9 Notice 1-Validation 1

Hose Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flareless-to-Flange
软管组件聚四氟乙烯波纹永久连接配件高温中压法兰无扩口

MIL MIL-DTL-32434/10 Notice 1-Validation 1

Hose Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flange-to-Flange
软管组件聚四氟乙烯波纹永久连接配件高温中压法兰到法兰

MIL MIL-DTL-32434/10

Hose Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flange-to-Flange
软管组件聚四氟乙烯卷曲永久连接配件高温中压法兰到法兰

MIL MIL-DTL-32434/7

Hose Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flareless-to-Flareless
软管组件聚四氟乙烯缠绕式永久连接配件高温中压无扩口至无扩口

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统