IEC 61196-4:2022 CMV-同轴通信电缆.第4部分:辐射电缆分规范-国家数字标准馆

现行 IEC 61196-4:2022 CMV

到馆提醒

收藏跟踪

购买正版

Coaxial communication cables - Part 4: Sectional specification for radiating cables 同轴通信电缆.第4部分:辐射电缆分规范

发布日期： 2022-09-20

IEC 61196-4:20 22 CMV包含官方标准及其注释版本。注释版本为您提供了一种快速简单的方法来比较IEC 61196-4:20 22版4.0和之前的IEC 61196-4:20 15版3.0之间的所有更改。此外，还提供了IEC SC 46A专家的意见，以解释最相关变更的原因，或澄清内容的任何部分。

IEC 61196-4:20 22适用于辐射同轴电缆，规定了术语和定义、材料和结构、IEC型式名称、标准等级和特性、标识、标记和标签、成品电缆的要求、质量评估、交付和储存等。

第四版取消并取代了2015年发布的第三版。与上一版相比，该版包含以下重大技术变更:a.改写了“1范围”，与同轴电缆的其他空白详细规范保持一致；
b.更新了“第2条规范性参考文献”中的不同标准；
c.增加了均匀辐射型电缆、停止频段和链路损耗的定义；
d.在4.2至4.5中增加了不同的材料和结构；
e.增加了“第5条IEC型式标识”；
f.在“6.2额定温度范围”中增加了不同材料的详细额定温度范围；
g.在“6.3工作频率范围”中增加了详细频率；
h.增加了“6.4停止频段”和“6.5辐射特性”；
i.在8.2.4、8.2.7、8.2.8、8.4.3至8.4.8中增加了不同的细节要求或典型值；
j.删除“7.4.4外导体椭圆度”；
k.增加了“8.2.11链路损耗”、“8.4.9电介质附着力”、“8。4.10绝缘收缩”、“8.4.11电缆最大拉力”；
i.电气要求中分别使用IEC 61196-1-123和IEC 61196-1-124替换附件A和附件B，并删除附件A和附件B；
m.在附录A中增加了“图A.1辐射电缆周向（Y-Z）耦合损耗测试示例”。

IEC 61196-4:2022 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 61196-4:2022 edition 4.0 and the previous IEC 61196-4:2015 edition 3.0. Furthermore, comments from IEC SC 46A experts are provided to explain the reasons of the most relevant changes, or to clarify any part of the content.


IEC 61196-4:2022 applies to radiating coaxial communication cables, and specifies the terms and definitions, material and construction, IEC type designation, standard rating and characteristics, identification, marking and labelling, requirements of finished cables, quality assessment, delivery and storage, etc.


This fourth edition cancels and replaces the third edition published in 2015 This edition includes the following significant technical changes with respect to the previous edition:

a. rewrote "1 Scope" to be consistent with other blank detail specifications of coaxial cables;
b. updated different standards in "Clause 2 Normative references";
c. added the definitions of uniformly radiating type cable, stop frequency band and link loss;
d. added different materials and constructions in 4.2 to 4.5;
e. added "Clause 5 IEC type designation";
f. added a detailed rated temperature range of different materials in "6.2 Rated temperature range";
g. added detailed frequencies in "6.3 Operating frequency range";
h. added "6.4 Stop frequency band" and "6.5 Radiating characteristics";
i. added different detail requirements or typical values in 8.2.4, 8.2.7, 8.2.8, 8.4.3 to 8.4.8;
j. deleted "7.4.4 Ovality of outer conductor";
k. added "8.2.11 Link loss", "8.4.9 Adhesion of dielectric", "8.4.10 Shrinkage for insulations", "8.4.11 Maximum pulling force of cable";

i. used IEC 61196-1-123 and IEC 61196-1-124 in the electrical requirements to replace Annex A and Annex B respectively and deleted Annex A and Annex B;
m. added "Figure A.1 Example of testing coupling loss around circumferential orientation of radiating cable (Y-Z)" in Annex A.