1.1 本试验方法描述了一种确定从漆辊盖转移到待涂漆表面的可释放纤维量的程序。 1.2 本试验方法适用于绒面织物油漆辊盖。 1.3 由于应用程序和面板评估都是主观的，因此这种测试方法只能用于一个设施内的比较测试，每组应用程序使用一个操作员，因为不同设施分配的最终结果可能不一致。 1.4 以英寸-磅单位表示的值应被视为标准值。括号中给出的值是对国际单位制的数学转换，仅供参考，不被视为标准值。 1.5 本标准并不旨在解决与其使用相关的所有安全问题（如果有的话）。 本标准的使用者有责任在使用前建立适当的安全、健康和环境实践，并确定监管限制的适用性。第7节“危害”中给出了一些具体的危害声明。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 =====意义和用途====== 3.1 在涂漆过程中释放的纤维可能会导致外观不可接受。

1.1 This test method describes a procedure for determining the amount of releasable fibers transferred from a paint roller cover to a surface being painted. 1.2 This test method is applicable to pile fabric paint roller covers. 1.3 Because both the application and panel evaluation are subjective, this test method should be used only for comparative testing within one facility using one operator for each set of applications, as the end result assigned by different facilities may not agree. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Some specific hazards statements are given in Section 7 on Hazards. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 3.1 Fibers that are released during painting can lead to a finish that is aesthetically unacceptable.