首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 MIL MIL-DTL-22520G Notice 2-Reinstatement
到馆提醒
收藏跟踪
购买正版
Crimping Tools, Wire Termination, General Specification for 电线终端压接工具通用规范
发布日期: 2013-12-10
本规范涵盖了用于连接可拆卸触点(如:信号、电源、同轴、屏蔽、热电偶和过滤针触点)的压接工具、附件和检验规的一般要求,同轴连接器、屏蔽连接器、套圈、端子、端盖和接头,用于电连接器、端子接线系统和其他电气或电子部件的导线。本规范所涵盖的压接工具和附件仅供军方使用,是唯一经鉴定、采购和发放用于军事维修的连接器组装设备。
This specification covers the general requirements for crimping tools, accessories and inspection gages used for connecting removable contacts (such as; signal, power, coaxial, shielded, thermocouple, and filter pin contacts) coaxial connectors, shielded connectors, ferrules, terminals, end caps and splices to wire conductors for use in electric connectors, terminal junction systems, and other electric or electronic components. The crimping tools and accessories covered by this specification are for use by the military and are the only connector assembly devices to be qualified, procured and issued for military maintenance use.
分类信息
发布单位或类别: 美国-美国军事规范和标准
关联关系
研制信息
相似标准/计划/法规
现行
SAE AS22520
Crimping Tools, Wire Termination, General Specification For
电线终端压接工具通用规范
2018-02-22
现行
MIL MIL-DTL-22520G Notice 1-Cancellation
Crimping Tools, Wire Termination, General Specification for
电线终端压接工具通用规范
2013-04-29
现行
MIL MIL-DTL-22520G Notice 3-Cancellation 2
CRIMPING TOOLS, WIRE TERMINATION, GENERAL SPECIFICATION FOR
电线终端压接工具通用规范
2018-01-29
现行
QPL QPL-22520-31
CRIMPING TOOLS, WIRE TERMINATION, GENERAL SPECIFICATION FOR(SUPERSEDING QPL-22520-30)
电线终端压接工具通用规范(代替QPL-22520-30)
2006-02-13
现行
QPL QPL-22520-31
CRIMPING TOOLS, WIRE TERMINATION, GENERAL SPECIFICATION FOR(SUPERSEDING QPL-22520-30)
电线终端压接工具通用规范(代替QPL-22520-30)
2006-02-13
现行
SAE AS22520/35
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION; IN-SERVICE INSPECTION GAGES FOR AS22520/34 CRIMP TOOLS
压接工具、端子、手、电线终端;AS22520/34压接工具的在用检验量规
2021-12-27
现行
SAE AS22520/43
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION; IN-SERVICE INSPECTION GAGE FOR AS22520/40 CRIMP TOOLS
压接工具、端子、手、电线终端;AS22520/40压接工具在用检验量规
2023-10-03
现行
SAE AS22520/42A
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION; IN-SERVICE INSPECTION GAGE FOR AS22520/41 CRIMP TOOLS
压接工具、端子、手、电线终端;AS22520/41压接工具在用检验量规
2021-12-27
现行
SAE AS22520/3D
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, INSPECTION GAGE FOR TYPE I AND II TOOLS
I型和II型工具的压接工具、端子、手、电线终端、检查量规
2021-12-27
现行
MIL MIL-C-22520/1C Notice 1-Cancellation
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 12 THROUGH 20
尺寸为12至20的线筒用压接工具、端子、手动电线终端
2018-01-29
现行
MIL MIL-C-22520/2C Notice 1-Cancellation
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 20 THROUGH 28
尺寸为20至28的线筒用压接工具、端子、手动电线终端
2018-01-29
现行
MIL MIL-C-22520/7B Notice 1-Cancellation
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 16, 20 AND 22
尺寸为16、20和22的线筒用压接工具、端子、手、电线终端
2018-01-29
现行
MIL MIL-C-22520/1C Amendment 2
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 12 THROUGH 20
尺寸为12至20的线筒用压接工具、端子、手动电线终端
1981-07-06
现行
MIL MIL-C-22520/1C
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 12 THROUGH 20
12至20号线筒用手动端子压接工具
1976-03-19
现行
MIL MIL-C-22520/8A Notice 1-Administrative
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION TOOL KIT FOR MIL-C-22520/7 CRIMPING TOOL AND POSTIONERS (NO S/S DOCUMENT)
MIL-C-22520/7压接工具和定位器用压接工具、端子、手动、电线终端工具包(无S/S文件)
1978-05-01
现行
SAE AS22520/18A
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION; IN-SERVICE INSPECTION GAGES FOR AS22520/17 CRIMP TOOLS (Stabilized: Oct 2021)
压接工具、端子、手、电线终端;AS22520/17压接工具的在用检验量规(稳定:2021年10月)
2021-10-06
现行
MIL MIL-C-22520/20 Notice 1-Cancellation
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 16 SHIELDED CONTACTS (SHIELD CRIMP SLEEVE)
压接工具、端子、手、用于尺寸为16的屏蔽触点的导线终端(屏蔽压接套管)
2018-01-29
现行
MIL MIL-C-22520/20
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 16 SHIELDED CONTACTS (SHIELD CRIMP SLEEVE)
16号屏蔽触点(屏蔽压接套管)用压接工具、端子、手动、电线终端
1976-03-19
现行
MIL MIL-C-22520/22
CRIMP TOOL, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 12 SHIELDED CONTACTS (SHIELDED CRIMP SLEEVE)
尺寸为12的屏蔽触点(屏蔽压接套管)用压接工具、端子、手动、电线终端
1976-03-19
现行
MIL MIL-DTL-22520/39
CRIMPING TOOL, TERMINAL, HAND, ACTUATED, WIRE TERMINATION, IN-SERVICE INSPECTION GAGE FOR
压接工具、端子、手动、驱动、电线终端、在用检查量规
1997-09-12