首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS EN ISO 10320:2019
到馆提醒
收藏跟踪
购买正版
Geosynthetics. Identification on site 土工合成材料 现场识别
发布日期: 2019-04-24
范围:本欧洲标准规定了用于建筑物隔热和/或隔音的松散填充纤维素绝缘(LFCI)产品在安装到墙壁、地板、走廊、屋顶和天花板中时的要求。 本欧洲标准是之前松散填充纤维素绝缘(LFCI)产品的规范 安装 本欧洲标准描述了产品特性,包括测试、标记和测试程序 以及标签和合规性评估规则。 本欧洲标准涵盖的产品也可用于预制隔热系统 和复合板;不包括包含这些产品的系统的结构性能。 本欧洲标准不适用于在10摄氏度和10摄氏度下宣称导热系数大于0060 W/(m和乘以K)或宣称热阻小于0.25平方米和乘以K/W的产品。 本欧洲标准未规定产品所需达到的所有性能水平 证明在特定应用中的适用性。所需的水平可在当地 法规或非冲突标准。 本欧洲标准不包括工厂生产的纤维素产品,这些产品被作为蝙蝠、垫子等投放市场 或用于建筑物隔热的板材,或用于建筑设备和工业装置隔热的松散填充纤维素产品。交叉引用:ISO 10318-1ISO 10318-2ISO 9864ISO/TS 13434EN 14196ISO 9863-1购买本文件时提供的所有现行修订版均包含在购买本文件中。
Scope: This European Standard specifies requirements for loose-fill cellulose insulation (LFCI) products for the thermal and/or sound insulation of buildings when installed into walls, floors, galleries, roofs and ceilings. This European Standard is a specification for the loose-fill cellulose insulation (LFCI) products before installation. This European Standard describes the product characteristics and includes procedures for testing, marking and labelling and the rules for evaluation of conformity. Products covered by this European Standard may also be used in prefabricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered. Products with a declared thermal conductivity at 10 °C greater than 0,060 W/(m × K) or a declared thermal resistance lower than 0,25 m2× K/W are not covered by this European Standard. This European Standard does not specify the required level of all properties to be achieved by a product to demonstrate fitness for purpose in a particular application. The required levels are to be found in local regulations or non-conflicting standards. This European Standard does not cover factory made cellulose products placed on the market as bats, mats or boards intended to be used for the insulation of buildings or loose-fill cellulose products for the insulation of building equipment and industrial installations.Cross References:ISO 10318-1ISO 10318-2ISO 9864ISO/TS 13434EN 14196ISO 9863-1All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
ISO 10320-2019
Geosynthetics — Identification on site
土工合成材料 - 现场鉴定
2019-02-28
现行
KS K ISO 10320
지오신세틱스 — 현장 확인
土工合成材料.现场识别
2021-10-18
现行
GB/T 14798-2008
土工合成材料 现场鉴别标识
Geosynthetics - Identification on site
2008-08-06
现行
KS K ISO 10320
지오텍스타일 및 관련 제품-현장 확인
土工织物及其相关产品现场标识
2016-12-28
现行
GOST R ISO 10320-2014
Материалы геотекстильные и относящиеся к ним изделия. Идентификация на месте
土工织物和土工织物相关产品 现场识别
现行
ASTM D4873/D4873M-17(2021)
Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples
土工合成卷和样品的识别 储存和处理标准指南
2021-05-01
现行
ASTM D8173-23
Standard Guide for Site Preparation, Layout, Installation, and Hydration of Geosynthetic Cementitious Composite Mats
土工合成水泥基复合材料垫的现场准备、布局、安装和水合的标准指南
2023-07-15
现行
KS K 0935
지오신세틱 차단재-고형 폐기물 저장소 및 처리장 건설에 요구되는 특성
土工合成屏障——固体废物贮存和处置场建设所需特性
2015-12-31
现行
KS K 0935
지오신세틱 차단재 — 고형 폐기물 저장소 및 처리장 건설에 사용 시 요구되는 특성
土工合成屏障.固体废物贮存和处置场施工所需的特性
2021-07-01
现行
UNE-EN 13493-2006
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
土工合成屏障.固体废物贮存和处置场施工所需的特性
2006-05-10
现行
BS EN 13492-2018
Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
土工合成屏障 液体废物处理场、转运站或二次安全壳施工所需的特性
2018-04-19
现行
UNE-EN 13492-2006
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
土工合成屏障.液体废物处理场、转运站或二次安全壳施工所需的特性
2006-03-15
现行
KS K 0934
지오신세틱 차단재 — 액상 폐기물 처리장, 운반장 또는 2차 저류장 건설에 사용시 요구되는 특성
土工合成材料屏障 - 用于建造液体废物处理场 转运站或二级安全壳所需的特性;德文版EN 13492:2018
2015-07-31
现行
KS K 0934
지오신세틱 차단재 — 액상 폐기물 처리장, 운반장 또는 2차 저류장 건설에 사용 시 요구되는 특성
土工合成屏障.液体废物处理场、转运站或二级安全壳施工所需的特性
2021-07-01
现行
UNE-EN ISO 10320-1999
GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - IDENTIFICATION ON SITE (ISO 10320:1999)
土工织物和土工织物相关产品现场标识
1999-10-20
现行
BS ISO 15639-1-2015
Radio frequency identification of animals. Standardization of injection sites for different animal species-Companion animals (cats and dogs)
动物的射频识别 不同动物种类注射部位的标准化
2015-07-31
现行
BS ISO 15639-2-2021
Radio frequency identification of animals. Standardization of injection sites for different animal species-Equine (horses, donkeys and zebras)
动物的射频识别 不同动物种类注射部位的标准化
2022-02-18
现行
AWWA WQTC55146
The Use of Pyrolysis GC/MS as a Single Analytical Tool for the Structural Characterization of NOM and the Identification of DBP Precursor Sites
使用热解GC/MS作为单一分析工具 对NOM进行结构表征 并识别DBP前体位置
2001-01-01
现行
ISO 15639-1-2015
Radio frequency identification of animals — Standardization of injection sites for different animal species — Part 1: Companion animals (cats and dogs)
动物的射频识别.不同动物种类注射部位的标准化.第1部分:伴生动物(猫和狗)
2015-07-07
现行
GB/T 41674.1-2022
动物射频识别 不同动物物种用注射部位的标准化 第1部分:伴侣动物(猫和狗)
Radio frequency identification of animals—Standardization of injection sites for different animal species—Part 1:Companion animals (cats and dogs)
2022-10-12