IEC 62841-2-14:2015（E）适用于手持计划器。单相交流或直流工具的额定电压不超过250 V，三相交流工具的额定电压不超过480 V。额定输入不超过3700 W。附录K中给出了本标准适用于电池工具的限值。本标准涉及所有人员在正常使用和合理可预见的误用工具时遇到的工具所带来的危险。手持式电动工具可安装在支架或工作台上，作为固定工具使用，而无需对工具本身进行任何改动，属于本标准的范围，手持式工具和支架的这种组合被视为可移动工具，因此包含在相关第3部分中。本第2-14部分将与第一版IEC 62841结合使用- 1.提请国家委员会注意，设备制造商和测试机构在发布新的、修订的或修订的IEC出版物后可能需要一段过渡期，以便根据新的要求制造产品，并为进行新的或修订的测试做好准备。委员会建议，本出版物的内容在出版之日起36个月内在全国范围内实施。 关键词:计划器手持切割头

IEC 62841-2-14:2015(E) applies to hand-held planners the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. This Part 2-14 is to be used in conjunction with the first edition of IEC 62841-1. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication. Key words: Planner, Hand held, Cutting head