BS EN 60143-1:2015适用于拟安装的电容器单元和电容器组 与交流输电或配电线路或构成部件的电路串联使用 指频率为15 Hz至60 Hz的交流电力系统。本标准的主要重点是传输应用。串联电容器单元和组通常用于高压电力系统。本标准适用于整个电压范围。本标准不适用于自愈金属化介质型电容器。以下电容器，即使与电路串联，也不在此限 标准:感应热发电厂用电容器（IEC 60110-1）；电机用电容器等（IEC 60252（所有部分））；电力电子电路中使用的电容器（IEC 61071）；放电灯用电容器（IEC 61048和IEC 61049）。对于标准类型的附件，如绝缘子、开关、仪表变压器、， 外部保险丝等。参见相关IEC标准。注1:内部熔断器保护电容器的附加要求，以及 内部保险丝见IEC 60143-3。另见附录C。注2外部熔断器保护电容器的附加要求，以及 外部熔断器见附录A和附录C。注3:串联电容器附件（火花隙、变阻器、放电电抗器、限流器）的单独标准 修订了IEC-6012、断路器、阻尼电抗器等 2012年完工。IEC 60143-3是串联电容器内部熔断器的一个单独标准，已进行了修订和修订 2013年完工。注4:关于无机身电容器单元和无机身电容器组的一些信息见附录C。本标准的目的是:制定关于性能、测试和额定值的统一规则； 制定具体的安全规则；作为安装和操作指南。交叉引用:IEC 60050IEC 60060-1:2010IEC 60071-1:2006IEC 60071-2:1996IEC 6013-2:2012IEC 6013-3:1998IEC 6013-4:2010IEC 60549:2013IEC 60871-1:2014IEC 62271-1:2007IEEE小时693:1997EN 60060-1:2010EN 60071-2:1997EN 6013:1998EN 6013-4:2010EN 60549:2010EN 60549:2013EN 60871:2014EN 62271-1:2008IEC 60060-2:2010IEC 60252:2010IEC 6025261071IEC 60270:2000IEC 60909-0:2001EN 60060-2:2011EN 60110-1:1998EN 60252-1:2011EN 61048:2006EN 61049:1993IEEE标准824-1994ANSI C29。 9:1983EN 61071EN 60270:2001EN 60909-0:2001购买本文件时可获得的所有现行修改件均包含在购买本文件中。

BS EN 60143-1:2015 applies both to capacitor units and capacitor banks intended to be used connected in series with an a.c. transmission or distribution line or circuit forming part of an a.c. power system having a frequency of 15 Hz to 60 Hz.The primary focus of this standard is on transmission application.The series capacitor units and banks are usually intended for high-voltage power systems. This standard is applicable to the complete voltage range.This standard does not apply to capacitors of the self-healing metallized dielectric type.The following capacitors, even if connected in series with a circuit, are excluded from this standard:capacitors for inductive heat-generating plants (IEC 60110-1);capacitors for motor applications and the like (IEC 60252 (all parts));capacitors to be used in power electronics circuits (IEC 61071);capacitors for discharge lamps (IEC 61048 and IEC 61049).For standard types of accessories such as insulators, switches, instrument transformers, external fuses, etc. see the pertinent IEC standard.NOTE 1 Additional requirements for capacitors to be protected by internal fuses, as well as the requirements for internal fuses, are found in IEC 60143-3. See also Annex C.NOTE 2 Additional requirements for capacitors to be protected by external fuses, as well as the requirements for external fuses, are found in Annex A and Annex C.NOTE 3 A separate standard for series capacitor accessories (spark-gaps, varistors, discharge reactors, currentlimiting damping reactors, damping resistors, circuit-breakers, etc.), IEC 60143-2, has been revised and was completed in 2012. A separate standard for internal fuses for series capacitors, IEC 60143-3 has been revised and was completed in 2013.NOTE 4 Some information regarding fuseless capacitor units and fuseless capacitor banks is found in Annex C.The object of this standard is:to formulate uniform rules regarding performance, testing and rating;to formulate specific safety rules;to serve as a guide for installation and operation.Cross References:IEC 60050IEC 60060-1:2010IEC 60071-1:2006IEC 60071-2:1996IEC 60143-2:2012IEC 60143-3:1998IEC 60143-4:2010IEC 60549:2013IEC 60871-1:2014IEC 62271-1:2007IEEE Std. 693:1997EN 60060-1:2010EN 60071-1:2006EN 60071-2:1997EN 60143-2:2013EN 60143-3:1998EN 60143-4:2010EN 60549:2013EN 60871-1:2014EN 62271-1:2008IEC 60060-2:2010IEC 60110-1:1998IEC 60252-1:2010IEC 61048:2006IEC 61049:1991IEC 61071IEC 60270:2000IEC 60909-0:2001EN 60060-2:2011EN 60110-1:1998EN 60252-1:2011EN 61048:2006EN 61049:1993IEEE Std 824-1994ANSI C29.9:1983EN 61071EN 60270:2001EN 60909-0:2001All current amendments available at time of purchase are included with the purchase of this document.