1.1 为了有效解释和保存评估结果，必须以通用、开放的格式显示、传输和存储数字无损评估数据。ASTM国际在普遍存在的医疗行业标准《医学数字成像与通信》（DICOM）的基础上，制定了无损评估数字成像与通信（DICONDE）的通用开放标准。本指南概述了DICONDE数据归档注意事项，并构建了用于高效存储和定位此类数据的信息模型。 1.2 本指南概述了如何从中找到的标准实践中管理ASTM DICONDE数据 2.2 用于数字无损检测数据的显示、传输和存储。 1.3 本指南概述了如何利用中的DICOM标准 2.4 用于显示、传输和存储数字无损检测数据，用于DICONDE标准实践中未明确说明但具有等效医学成像模式的测试方法。 1.4 本指南提供了未在本指南中提及的无损数字测试数据的存储建议 1.2 或 1.3 . 1.5 单位- 尽管本指南不包含需要单位的值，但它确实描述了需要正确解释单位的数据存储和通信方法。本指南要求的国际单位应视为标准单位。 本指南中不包括其他测量单位。 1.6 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 5.1 5.1本指南旨在通过介绍DICONDE控制和维护电子无损检测数据的基本原理，为无损检测成像系统的最终用户提供帮助和建议。本指南无意控制所检查材料或部件的可接受性。 5.2 推荐最终用户: 5.2.1 负责数字无损评估结果的创建、显示、传输或存储的人员将使用本指南。 5.2.2 负责购买和实施符合DICONDE标准的无损检测系统的人员将使用本指南。

1.1 The display, transfer, and storage of digital nondestructive evaluation data in a common, open format is necessary for the effective interpretation and preservation of evaluation results. ASTM International has developed common open standards for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) based on the ubiquitous healthcare industry standard Digital Imaging and Communication in Medicine (DICOM). This guide provides an overview of DICONDE data archiving considerations and building information models for the efficient storing and locating of such data. 1.2 This guide provides an overview of how to manage ASTM DICONDE data from standard practices found in 2.2 for the display, transfer, and storage of digital nondestructive test data. 1.3 This guide provides an overview of how to utilize the DICOM standard found in 2.4 for the display, transfer, and storage of digital nondestructive test data for test methods not explicitly addressed by a DICONDE standard practice but having an equivalent medical imaging modality. 1.4 This guide provides recommendations for the storage of nondestructive digital test data not addressed in 1.2 or 1.3 . 1.5 Units— Although this guide contains no values that require units, it does describe methods to store and communicate data that do require units to be properly interpreted. The SI units required by this guide are to be regarded as standard. No other units of measurement are included in this guide. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 5.1 This guide is intended to assist and provide recommendations for an end-user of NDE imaging systems by providing an introduction to the basic principles of DICONDE for the control and maintenance of electronic NDE data. This guide is not intended to control the acceptability of the materials or components examined. 5.2 Recommended End-users: 5.2.1 Personnel responsible for the creation, display, transfer, or storage of digital nondestructive evaluation results will use this guide. 5.2.2 Personnel responsible for the purchase and implementation of NDT systems conforming to the DICONDE standard will use this guide.