1.1 本规范规定了压实、矿物绝缘、金属护套（MIMS）、基底金属热电偶电缆的要求， 2. 具有至少两个热元件。 3. 1.2 本规范描述了所需材料、加工和测试要求、可选补充测试、质量保证和验证选择。 1.3 结构材料包括标准基底金属热电偶、奥氏体不锈钢或其他耐腐蚀护套材料，以及氧化镁（MgO）或氧化铝（Al 2. 奥 3. )绝缘。 1.4 以国际单位制或英寸磅单位表示的数值应单独视为标准。每个系统中规定的值可能不是完全相等的；因此，每个系统应独立使用。将两个系统的值合并可能导致不符合标准。 1.5 本标准并非旨在解决与其使用相关的所有安全问题（如有）。 本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This specification establishes requirements for compacted, mineral-insulated, metal-sheathed (MIMS), base metal thermocouple cable, 2 with at least two thermoelements. 3 1.2 This specification describes the required material, processing and testing requirements, optional supplementary testing, quality assurance, and verification choices. 1.3 The material of construction includes standard base metal thermoelements, austenitic stainless steel or other corrosion resistant sheath material, and either magnesia (MgO) or alumina (Al 2 O 3 ) insulation. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.