CD-ROM是单用户许可证。这些内转换表适用于所有原油、石油产品和石化产品。这些标准适用于散装液体量。第1部分——60°F时API重力的转换提供了将60°F时API重力转换为真空和空气中等效密度的实施程序。本标准给出了60°F时API重力值的以下等价物:60°F时的相对密度（旧表3）；60°F时的绝对密度；15°C时的绝对密度（旧表3）； 真空和空气中60°F时每加仑磅（旧表8）；真空和空气中60°F时每磅美国加仑（旧表8）；真空和空气中60°F时每1000美国加仑短吨（旧表9）；真空和空气中60°F时每短吨美国加仑（旧表10）；真空和空气中60°F时每桶短吨（旧表9）；真空和空气中60°F时每短吨桶数（旧表10）；真空和空气中60°F时每1000美国加仑长吨（旧表11）；真空和空气中60°F时每长吨美国加仑（旧表12）； 真空和空气中60°F条件下的长吨/桶（旧表11）；真空和空气中60°F时每长吨桶数（旧表12）；真空和空气中60°F条件下每1000美国加仑公吨（旧表13）；真空和空气中60°F时每桶公吨（旧表13）；真空和空气中60°F时每公吨桶数；真空和空气中15°C时每短吨立方米（旧表14）；真空和空气中15°C时每长吨立方米（旧表14）。虽然与API gravity无关，但为了方便用户，我们提供了以下内容:。 S.60°F时的加仑到15°C时的升（旧表4）；60°F条件下的桶与15°C条件下的升（旧表4）；第2部分——相对密度（60/60°F）的转换提供了将真空和空气中的相对密度（60/60°F）转换为等效密度的实施程序。本标准给出了相对密度（60/60°F）任何值的以下等价物:60°F时的API重力（旧表21）；60°F时的绝对密度；15°F时的绝对密度（旧表21）；60°F和空气中每加仑磅（旧表26）；美国。 真空和空气中60°F时每磅加仑（旧表26）；真空和空气中60°F时每1000美国加仑短吨（旧表27）；真空和空气中60°F时每短吨美国加仑（旧表28）；真空和空气中60°F时每桶短吨（旧表27）；真空和空气中60°F时每短吨桶数（旧表28）；真空和空气中60°F时每1000美国加仑长吨（旧表29）；真空和空气中60°F时每长吨美国加仑（旧表30）；真空和空气中60°F条件下的长吨/桶（旧表29）； 真空和空气中60°F条件下每长吨桶数（旧表30）；真空和空气中60°F时每1000美国加仑公吨；真空和空气中60°F时每桶公吨；真空和空气中60°F时每公吨桶数；真空和空气中15°C时每短吨立方米（旧表31）；真空和空气中15°C时每长吨立方米（旧表31）。虽然与相对密度无关，但为了方便用户，以下内容包括在内:60°F时的美国加仑到15°C时的升（旧表22）；60°F条件下的桶与15°C条件下的升（旧表22、表52）。 第3部分——15°C下绝对密度的转换提供了将15°C下绝对密度转换为真空和空气中等效密度的实施程序。本标准给出了15°C下任何绝对密度值的以下等价物:15°C下的相对密度；60°F时的绝对密度；60°F时的相对密度（旧表51）；60°F时的API重力（旧表51）；-15°C下的密度（类似于旧表56）；将15°C下的表观密度转换为15°C下的绝对密度；真空和空气中15°C时的立方米/公吨（类似于旧表56）； 真空和空气中15°C时每短吨立方米；真空和空气中15°C时每长吨立方米；真空和空气中60°F时每加仑磅；真空和空气中60°F时每磅美国加仑；真空和空气中15°C时每1000升（立方米）短吨（旧表57）；真空和空气中60°F时每1000美国加仑短吨；真空和空气中60°F时每短吨美国加仑；真空和空气中60°F时每桶短吨；真空和空气中60°F时每短吨桶数；真空和空气中15°C时每1000升长吨（立方米）（旧表57）； 真空和空气中60°F时每公吨美国加仑（旧表58）；真空和空气中60°F时每公吨桶数（旧表58）；真空和空气中60°F时每1000美国加仑长吨；U、 真空和空气中60°F时每长吨S加仑；真空和空气中60°F条件下的长吨/桶；真空和空气中60°F时每长吨桶数。虽然与相对密度无关，但为了方便用户，以下数据包括在内:15°C时的升到60°F时的美国加仑；15°C时的立方米到60°F时的桶数（旧表52）。*** 注:勘误表不包括在CD中- ROM，请参阅本产品记录附带的链接，以便免费下载。注意:如果您正在访问本出版物（PDF）的可下载格式，则从PDF中到补充电子表格的链接将不起作用。需要时，必须手动打开电子表格。

CD-ROM is single-user license.These intraconversion tables are applicable to all crude oils, petroleum products, and petrochemicals. These standards are intended for application to bulk liquid quantities.Part 1--Conversions of API Gravity at 60°FProvides implementation procedures for conversion of API gravity at 60°F to equivalent densities in both in vacuo and in air values. This standard gives the following equivalents for any value of API gravity at 60°F:relative density at 60°F (old Table 3);absolute density at 60°F;absolute density at 15°C (old Table 3);pounds per U.S. gallon at 60°F in vacuo and in air (old Table 8);U.S. gallons per pound at 60°F in vacuo and in air (old Table 8);short tons per 1000 U.S. gallons at 60°F in vacuo and in air (old Table 9);U.S. gallons per short ton at 60°F in vacuo and in air (old Table 10);short tons per barrel at 60°F in vacuo and in air (old Table 9);barrels per short ton at 60°F in vacuo and in air (old Table 10);long tons per 1000 U.S. gallons at 60°F in vacuo and in air (old Table 11);U.S. gallons per long ton at 60°F in vacuo and in air (old Table 12);long tons per barrel at 60°F in vacuo and in air (old Table 11);barrels per long ton at 60°F in vacuo and in air (old Table 12);metric tons per 1000 U.S. gallons at 60°F in vacuo and in air (old Table 13);metric tons per barrel at 60°F in vacuo and in air (old Table 13);barrels per metric ton at 60°F in vacuo and in air;cubic meters per short ton at 15°C in vacuo and in air (old Table 14);cubic meters per long ton at 15°C in vacuo and in air (old Table 14).While not related to API gravity, the following are included for user convenience:U.S. gallons at 60°F to litres at 15°C (old Table 4);barrels at 60°F to litres at 15°C (old Table 4);Part 2--Conversions for Relative Density (60/60°F)Provides implementation procedures for conversion of relative density (60/ 60°F) to equivalent densities in both in vacuo and in air values. This standard gives the following equivalents for any value of relative density (60/60°F):API gravity at 60°F (old Table 21);absolute density at 60°F;absolute density at 15°F (old Table 21);pounds per U.S. gallon at 60°F in and in air (old Table 26);U.S. gallons per pound at 60°F in vacuo and in air (old Table 26);short tons per 1000 U.S. gallons at 60°F in vacuo and in air (old Table 27);U.S. gallons per short ton at 60°F in vacuo and in air (old Table 28);short tons per barrel at 60°F in vacuo and in air (old Table 27);barrels per short ton at 60°F in vacuo and in air (old Table 28);long tons per 1000 U.S. gallons at 60°F in vacuo and in air (old Table 29);U.S. gallons per long ton at 60°F in vacuo and in air (old Table 30);long tons per barrel at 60°F in vacuo and in air (old Table 29);barrels per long ton at 60°F in vacuo and in air (old Table 30);metric tons per 1000 U.S. gallons at 60°F in vacuo and in air;metric tons per barrel at 60°F in vacuo and in air;barrels per metric ton at 60°F in vacuo and in air;cubic meters per short ton at 15°C in vacuo and in air (old Table 31);cubic meters per long ton at 15°C in vacuo and in air (old Table 31).While not related to relative density, the following are included for user convenience:U.S. gallons at 60°F to litres at 15°C (old Table 22);barrels at 60°F to litres at 15°C (old Table 22, Table 52).Part 3--Conversions for Absolute Density at 15°CProvides implementation procedures for conversion of absolute density at 15°C to equivalent densities in both in vacuo and in air values. This standard gives the following equivalents for any value of absolute density at 15°C:relative density at 15°C;absolute density at 60°F;relative density at 60°F (old Table 51);API gravity at 60°F (old Table 51); - density at 15°C (similar to old Table 56);conversion of apparent density at 15°C to absolute density at 15°C;cubic meters per metric ton at 15°C in vacuo and in air (similar to old Table 56);cubic meters per short ton at 15°C in vacuo and in air;cubic meters per long ton at 15°C in vacuo and in air;pounds per U.S. gallon at 60°F in vacuo and in air;U.S. gallons per pound at 60°F in vacuo and in air;short tons per 1000 litres (cubic meters) at 15°C in vacuo and in air (old Table 57);short tons per 1000 U.S. gallons at 60°F in vacuo and in air;U.S. gallons per short ton at 60°F in vacuo and in air;short tons per barrel at 60°F in vacuo and in air;barrels per short ton at 60°F in vacuo and in air;long tons per 1000 litres (cubic meters) at 15°C in vacuo and in air (old Table 57);U.S. gallons per metric ton at 60°F in vacuo and in air (old Table 58);barrels per metric ton at 60°F in vacuo and in air (old Table 58);long tons per 1000 U.S. gallons at 60°F in vacuo and in air;U.S. gallons per long ton at 60°F in vacuo and in air;long tons per barrel at 60°F in vacuo and in air;barrels per long ton at 60°F in vacuo and in air.While not related to relative density, the following are included for user convenience:litres at 15°C to U.S. gallons at 60°F;cubic meters at 15°C to barrels at 60°F (old Table 52).* * * Note: Errata is not included with CD-ROM, see link(s) attached to this product record to download for free.Note: If you are accessing the downloadable format of this publication (PDF), links from within the PDF to the supplementary spreadsheets will not work. The spreadsheets must be opened manually whenever needed.