本文件描述了一种定义挤出基添加剂制造（AM）工艺中所用塑料材料要求的方法。材料包括适合加工成零件的未填充、填充和增强塑料材料。这些材料还可能含有特殊添加剂（例如阻燃剂、稳定剂等）。工艺包括所有基于材料挤压的AM工艺。 本文件适用于材料、原料、塑料零件或三者的任何组合的制造商，使用基于AM的挤压材料。交叉引用:ISO/ASTM 52900ASTM D638ISO 11359-2ISO 1133-1ASTM D790ASTM D149ISO 179-2ISO 13485ISO 527-1ASTM D4000ISO 2580-1ISO 9001ISO 7391-1ASTM D4673ASTM D256ASTM D5205ASTM D785ISO 179-1ASTM D648ISO 6186ASTM D3935ISO 306ASTM E831ASTM D1895ASTM D69ASTM D1525ISO 62ASTM E11ISO 75-2ISO 19062-1ISO 8130-1ASTM D257D1921ISO 178ISO 2135-1ASTM所有现行修正案购买本文件时提供的信息包括在内。

This document describes a method for defining requirements for plastic materials used in extrusion-based additive manufacturing (AM) processes. Materials include unfilled, filled, and reinforced plastic materials suitable for processing into parts. These materials can also contain special additives (e.g. flame retardants, stabilizers, etc.). Processes include all material extrusion-based AM processes. This document is intended for use by manufacturers of materials, feedstocks, plastic parts or any combination of the three using material extrusion-based AM.Cross References:ISO/ASTM 52900ASTM D638ISO 11359-2ISO 1133-1ASTM D790ASTM D149ISO 179-2ISO 13485ISO 527-1ASTM D4000ISO 2580-1ISO 9001ISO 7391-1ASTM D4673ASTM D256ASTM D5205ASTM D785ISO 179-1ASTM D648ISO 6186ASTM D3935ISO 306ASTM E831ASTM D1895ASTM D696ASTM D1525ISO 62ASTM E11ISO 75-2ISO 19062-1ISO 8130-1ASTM D257ASTM D1921ISO 178ISO 21305-1ISO 1043-1ASTM D150ASTM D1238All current amendments available at time of purchase are included with the purchase of this document.