BS EN IEC/IEEE 65700:2018适用于任何直流电压的室外和室内套管 电容分级或气体绝缘型系统，用作充油管道组件 换流变压器和平滑电抗器，以及空对空直流套管。这 本标准不适用于以下情况:电缆终端（凹头）；互感器套管；测试电源用套管；外部采用气体绝缘（大气压力下的空气除外）的套管 到衬套；工业用衬套；牵引用衬套；配电级变压器用套管。本标准参考了IEC 60137的一般条款和条件，并定义了 使用的特殊术语、操作条件、额定值、试验程序以及通用术语 直流应用套管的机械和电气要求。交叉引用:IEC 60076-1EN 60296EN 60376IEC 60071-5EN 60480IEC 60076-2IEC 60296IEC 60480IEC 60270EN 60060-1（IEC 60060-1:2010）ASEN 60137（IEC 60137:2008）ASIEC 60376EN 55016-1CISPR 18-2EN 60071-1EN 61378-2IEC 60137:2008EN 60076-1IEC 61245EN 60836EN 60270EN 61462EN 60071-5IEC 61462EEC57。19.0:2004IEC 61378-2IEC 60060-1:2010IEC 60867EN 60076-2IEC 60050CISPR 16-1EN 62155IEC 60071-1EN 60867IEC 60836IEC 60076-7IEC 62155IEC 60480IEC 60296IEEE C37。23:2008IEC 60836EN 60836IEEE C57。19.01:2000IEC 61378-1EN 60480IEC 60867IEC 60376IEC 61378-2EN 60867EN 60376IEC指南109IEC 61378-3EN 60296IEEE标准C37。23IEC 61463公司:勘误表，2018年4月

BS EN IEC/IEEE 65700:2018 applies to outdoor and indoor bushings of any voltage used on DC systems, of capacitance graded or gas insulated types for use as components of oil-filled converter transformers and smoothing reactors, as well as air-to-air DC bushings. This standard does not apply to the following:cable terminations (potheads);bushings for instrument transformers;bushings for test power supplies;bushings applied with gaseous insulation (other than air at atmospheric pressure) external to the bushing;bushings for industrial application;bushings for traction application;bushings for distribution class transformers.This standard makes reference to IEC 60137 for general terms and conditions and defines the special terms used, operating conditions, ratings, test procedures as well as general mechanical and electrical requirements for bushings for DC application.Cross References:IEC 60076-1EN 60296EN 60376IEC 60071-5EN 60480IEC 60076-2IEC 60296IEC 60480IEC 60270EN 60060-1 (IEC 60060-1:2010) ASEN 60137 (IEC 60137:2008) ASIEC 60376EN 55016-1CISPR 18-2EN 60071-1EN 61378-2IEC 60137:2008EN 60076-1IEC 61245EN 60836EN 60270EN 61462EN 60071-5IEC 61462IEEE C57.19.0:2004IEC 61378-2IEC 60060-1:2010IEC 60867EN 60076-2IEC 60050CISPR 16-1EN 62155IEC 60071-1EN 60867IEC 60836IEC 60076-7IEC 62155IEC 60480IEC 60296IEEE C37.23:2008IEC 60836EN 60836IEEE C57.19.01:2000IEC 61378-1EN 60480IEC 60867IEC 60376IEC 61378-2EN 60867EN 60376IEC Guide 109IEC 61378-3EN 60296IEEE Std C37.23IEC 61463Incorporates the following:Corrigendum, April 2018