本欧洲标准适用于由传感元件组成的可复位线型热探测器 使用连接到传感器控制单元的光纤、气动管或电气传感器电缆， 直接或通过接口模块，用于火灾探测和火灾报警系统 安装在建筑物和其他土木工程内及其周围（见EN 54-1:2011）。 本欧洲标准规定了要求和性能标准，以及相应的试验 用于评估和验证产品性能稳定性（AVCP）的方法和规定 可重置的线型热探测器符合本标准。 本欧洲标准还涵盖了拟在本地环境中使用的可重置线型热探测器 保护厂房和设备。 交叉引用:EN 60068-2-75:1997EN 60068-1:1994IEC 60068-2-1:2007IEC 60068-2-42:2003EN 60068-2-2:2007IEC 60068-2-27:2008EN 54-7:2000EN 50130-4:2011EN 60068-2-42:2003IEC 60068-2-78:2001EN 60068-2-1:2007IEC 60068-2-6:2007EN 60068-2-3060068-2-2:2007EN ISO 9001:2008EN 54-2:1997ISO 9001:2008包含以下内容:修订版，2020年3月

This European Standard applies to resettable line-type heat detectors consisting of a sensing element using an optical fibre, a pneumatic tube or an electrical sensor cable connected to a sensor control unit, either directly or through an interface module, intended for use in fire detection and fire alarm systems installed in and around buildings and other civil engineering works (see EN 54-1:2011). This European Standard specifies the requirements and performance criteria, the corresponding test methods and provides for the Assessment and Verification of Constancy of Performance (AVCP) of resettable line-type heat detectors to this EN. This European Standard also covers resettable line-type heat detectors intended for use in the local protection of plant and equipment.Cross References:EN 60068-2-75:1997EN 60068-1:1994IEC 60068-2-1:2007IEC 60068-2-42:2003EN 60068-2-2:2007IEC 60068-2-27:2008EN 54-7:2000EN 50130-4:2011EN 60068-2-42:2003IEC 60068-2-78:2001EN 60068-2-1:2007IEC 60068-2-6:2007EN 60068-2-30:2005IEC 60068-1:1988IEC 60068-2-30:2005IEC 60068-1:1988/AMD1:1992EN 60068-2-78:2001EN 60068-2-27:2009EN 54-1:2011EN 60068-2-6:2008IEC 60068-2-75:1997IEC 60068-2-2:2007EN ISO 9001:2008EN 54-2:1997ISO 9001:2008Incorporates the following:Amendment, March 2020