항공기용 파스너 합금강
航空航天紧固件材料用合金钢

2007-06-25

Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications
紧固件.耐腐蚀不锈钢紧固件的机械性能.第5部分:高温用特殊紧固件（也包括镍合金紧固件）

2022-04-29

Aerospace series. Weldability and brazeability of materials in aerospace constructions-Welding and brazing of homogeneous assemblies of high alloyed steels
航空航天系列 航空航天结构材料的焊接性和钎焊性 高合金钢均质组件的焊接和钎焊

2012-10-31

紧固件机械性能 高温用不锈钢和镍合金螺栓、螺钉、螺柱和螺母
Mechanical properties of fasteners—Stainless steel and nickel alloys bolts, screws, studs and nuts for high temperature applications

2020-11-19

Aerospace series. Weldability and brazeability of materials in aerospace constructions-Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels
航空航天系列 航空航天结构材料的焊接性和钎焊性 非合金钢和低合金钢均质组件的焊接和钎焊

2010-05-31

Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels
航空航天系列.航空航天结构中材料的可焊性和钎焊性.第004部分:高合金钢均质组件的焊接和钎焊；德文版EN 4632-004:2012

2013-11-01

Aerospace series. Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners
航空航天系列 具有规定抗拉强度的钢的锌镍（12%-16%镍）镀层？1450MPa 零件和紧固件用铜合金、镍合金和铝合金

2014-12-31

Aerospace series. Flange couplings. Gasket seal with nickel alloy C seal on heat resisting steel plate with 3 fastening holes. Inch series
航空航天系列 法兰联轴器 带3个紧固孔的耐热钢板上的镍合金C密封垫圈 英寸系列

2017-08-08

Aerospace series. Flange couplings. Gasket seal with nickel alloy C seal on heat resisting steel plate with 4 fastening holes. Inch series
航空航天系列 法兰联轴器 带4个紧固孔的耐热钢板上的镍合金C密封垫圈 英寸系列

2017-06-16

Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
碳钢和合金钢螺栓、螺钉、垫圈、螺母和特殊螺纹紧固件的热浸镀锌要求

2023-11-01

Welded and brazed assemblies for aerospace constructions Weldability and brazeability of materials - Part 004: Homogeneous assemblies highly alloyed steels
航空航天结构用焊接和钎焊组件材料的可焊性和可钎焊性第004部分:均质组件高合金钢

2010-02-28

BS EN 4812. Aerospace series. Flange couplings. Gasket seal with nickel alloy C seal on heat resisting steel plate with 4 fastening holes. Inch series
英国标准EN 4812 航空航天系列 法兰联轴器 带4个紧固孔的耐热钢板上的镍合金C密封垫圈 英寸系列

2009-08-06

BS EN 4810. Aerospace series. Flange couplings. Gasket seal with nickel alloy C seal on heat resisting steel plate with 3 fastening holes. Inch series
英国标准EN 4810 航空航天系列 法兰联轴器 带3个紧固孔的耐热钢板上的镍合金C密封垫圈 英寸系列

2009-08-06

Aerospace series - Zinc-Nickel (12 % to 16 % Ni) plating of steels with specified tensile strength 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners; German and English version EN 4826:2014
航空航天系列.规定抗拉强度为1450MPa的钢、零件和紧固件用铜合金、镍合金和铝合金的锌镍（12%至16%镍）镀层；德语和英语版本EN 4826:2014

2015-03-01

Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003: Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels; German and English version EN 4632-003:2010
航空航天系列.航空航天结构中材料的可焊性和钎焊性.第003部分:非合金钢和低合金钢均质组件的焊接和钎焊；德语和英语版本EN 4632-003:2010

2010-09-01

Threaded Shear Fastener, Flush & Protruding Type for Applications Up to 900 F Maximum - 5% Cr Ultra High Strength Alloy Steel (H-11) - Procurement Specification
最大温度不超过900华氏度的螺纹剪切紧固件-5%铬超高强度合金钢（H-11）-采购规范

1992-06-30

Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal on heat resisting steel plate with 4 fastening holes - Inch series; German and English version EN 4812:2017
航空航天系列.法兰连接件.带4个紧固孔的耐热钢板上的镍合金C密封垫圈.英制系列；德语和英语版本EN 4812:2017

2017-08-01

Aerospace series - Flange couplings - Gasket seal with nickel alloy C seal on heat resisting steel plate with 3 fastening holes - Inch series; German and English version EN 4810:2017
航空航天系列.法兰连接件.带3个紧固孔的耐热钢板上的镍合金C密封垫圈.英制系列；德语和英语版本EN 4810:2017

2017-08-01