BS EN ISO 16093:2017涉及锯床的所有重大危险、危险情况和事件 如第3条所定义，其主要预期用途是锯切冷金属（黑色金属和有色金属）， 或部分由冷金属制成的材料，并在可合理预见的误用条件下使用 制造商（见第4条）。本文件适用于以下日期后制造的（金属）锯床: 本文件的出版。当考虑额外加工（即铣削、镗孔、标记、精加工等）时 文件可作为安全要求的基础。有关更多详细信息，请参阅 参考文献本文件涉及噪声危害，但未提供完整的噪声测试代码。其目的是 在本文件的下一次修订中起草此类代码。 本文件不包括火灾和爆炸危险的要求和安全措施。它是 旨在在本文件的下一次修订中处理这些问题。交叉引用:ISO 11202:2010 Ed 2ISO 12100:2010 Ed 1ISO 11204:2010 Ed 2ISO 9614-1:1993ISO 13857:2008 Ed 1ISO 4413:2010 CD-ROM Ed 3ISO 13854:1996ISO 14119:2013 Ed 2ISO 9355-3:2006 Ed 1ISO/TR 11688-1:1995ISO 4414:2010 CD-ROM Ed 3ISO 3746:2010 Ed 3ISO 3744:2010 Ed 3IEC 60204-1:2009ISO 13850:2015ISO 14122-2:2016ISO 14120:2015ISO 13856-1:201361000-6-4:2006 Cons Ed 2-1EN 1837:1999+A1:2009ISO 13855:2010 Ed 2ISO 13849-1:2015IEC 61000-6-2:2016EN 1037:1995+A1:2008 EN 1299:1997+A1:2008ISO 11821:1997（R08）ISO 11546-1:1995ISO 6385:2016ISO 11691:1995ISO 14738:2002 Ed 1EN 1005- 3:2002+A1:2008ISO 20643:2005 Ed 1EN 626-1:1994+A1:2008EN 1127-1:2011ISO/TR 11688-2:1998IEC 61496-2:2013EN 13478:2001EN 1005-1:2001+A1:2008IEC 61496-1:2012 ED3ISO 9241-333:2017ISO 7250-1:2008 Ed 1EN 1005-2:2003+A1:2008ISO 11820:1996ISO 11546-2:1995ISO 14118:2000EN 981:2006+A1:2008购买本文件时所有现有的修改件均包括在内。

BS EN ISO 16093:2017 deals with all significant hazards, hazardous situations and events to sawing machines as defined in Clause 3, whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).This document is applicable to (metal) sawing machines which are manufactured after the date of publication of this document.When additional processing (i.e. milling, boring, marking, finishing operation, etc.) is considered, this document can serve as a basis for safety requirements. For more detailed information, refer to the bibliography.This document deals with noise hazards but does not provide a full noise test code. It is intended to draft such a code in the next revision of this document.This document does not include requirements and safety measures for fire and explosion hazards. It is intended to deal with them in the next revision of this document.Cross References:ISO 11202:2010 Ed 2ISO 12100:2010 Ed 1ISO 11204:2010 Ed 2ISO 9614-1:1993ISO 13857:2008 Ed 1ISO 4413:2010 CD-ROM Ed 3ISO 13854:1996ISO 14119:2013 ED2ISO 9355-3:2006 Ed 1ISO/TR 11688-1:1995ISO 4414:2010 CD-ROM Ed 3ISO 3746:2010 Ed 3ISO 3744:2010 Ed 3IEC 60204-1:2009ISO 13850:2015ISO 14122-2:2016ISO 14120:2015ISO 13856-1:2013 ED2ISO 14122-3:2016ISO 4871:1996ISO 9355-1:1999 (R10)IEC 61000-6-4:2006 Cons Ed 2-1EN 1837:1999+A1:2009ISO 13855:2010 Ed 2ISO 13849-1:2015IEC 61000-6-2:2016EN 1037:1995+A1:2008 EN 1299:1997+A1:2008ISO 11821:1997 (R08)ISO 11546-1:1995ISO 6385:2016ISO 11691:1995ISO 14738:2002 Ed 1EN 1005-3:2002+A1:2008ISO 20643:2005 Ed 1EN 626-1:1994+A1:2008EN 1127-1:2011ISO/TR 11688-2:1998IEC 61496-2:2013EN 13478:2001EN 1005-1:2001+A1:2008IEC 61496-1:2012 ED3ISO 9241-333:2017ISO 7250-1:2008 Ed 1EN 1005-2:2003+A1:2008ISO 11820:1996ISO 11546-2:1995ISO 14118:2000EN 981:2006+A1: 2008All current amendments available at time of purchase are included with the purchase of this document.