Dispersibility of solid particles into a liquid
固体颗粒在液体中的分散性

2021-10-13

Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
粒度分析用金属粉末和相关化合物的液体分散标准指南

2023-02-01

Pigments and extenders — Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods
颜料和填充剂.用液体沉淀法对悬浮颜料或填充剂进行沉淀粒度测定的分散程序

2023-11-21

Государственная система обеспечения единства измерений. Дисперсный состав жидких сред. Определение размеров частиц по динамическому рассеянию света
确保测量一致性的状态系统 液体介质的分散组成 通过动态光散射测定粒径

Бензидин. Измерение концентрации бензидина в воде с помощью жидкость-жидкостной экстракции или твердофазной экстракции и обращеннофазовой высокоэффективной жидкостной хроматографии/корпускулярно-лучевого интерфейса/масс-спектрометрии
联苯胺 通过液 - 液萃取或固相萃取和反相高效液相色谱/粒子束界面/质谱法测定水中的浓度

2013-11-14

Paints and varnishes. Wettability-Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
油漆和清漆 润湿性

2017-07-28

Paints and varnishes. Wettability-Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
油漆和清漆 润湿性

2020-03-13

Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
色漆和清漆.润湿性.第5部分:从接触角测定液体表面张力的极性和分散性部分.对仅对其表面能有分散作用的固体的测量

2024-10-18

Standard Guide for Size and Shape of Solid Particles, Liquid Droplets, and Gas Bubbles, Dynamically Conveyed, Using a Dynamic Imaging Analyzer
使用动态成像分析仪动态传送的固体颗粒、液滴和气泡的尺寸和形状的标准指南

2022-02-01

Protective clothing. Protection against liquid and gaseous chemicals, including liquid aerosols and solid particles. Test method. Determination of leak-tightness of gas-tight suits (Internal Pressure Test)
防护服 防止液体和气体化学品 包括液体气溶胶和固体颗粒 测试方法 气密服密封性的测定（内压试验）

1994-10-15

Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017)
色漆和清漆.润湿性.第5部分:通过接触角测量液体表面张力的极性和分散部分的测定（ISO 19403-5-2017）；德文版EN ISO 19403-5:2020

2020-04-01

Protective clothing for use against liquid and gaseous chemicals, including aerosols and solid particles - Determination of leak tightness of gastight suits (Internal pressure test)
防护服.防液体和气体化学品 包括液体气溶胶和固体颗粒的防护.试验方法:气密服密封性的测定（内压试验）；德文版EN 464:1994

1994-09-01

PROTECTIVE CLOTHING FOR USE AGAINST LIQUID AND GASEOUS CHEMICALS, INCLUDING AEROSOLS AND SOLID PARTICLES. TEST METHOD: DETERMINATION OF LEAK-TIGHTNESS OF GAS-TIGHT SUITS (INTERNAL PRESSURE TEST).
防护服 用于抵抗液体和气体化学品 包括气溶胶和固体颗粒 试验方法:测定气密服的密封性（内压试验）

1995-09-08

Система стандартов безопасности труда. Одежда специальная для защиты от жидких и газообразных химических веществ, в том числе жидких и твердых аэрозолей. Метод определения герметичности газонепроницаемых костюмов
职业安全标准体系 用于液体和气体化学品的防护服 包括气溶胶和固体颗粒 气密性套装密封性的测定方法

Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 1: Performance requirements for ventilated and non-ventilated "gas-tight" (Type 1) and "non-gas-tight" (Type 2) chemical protective suits.
液体和气体化学品防护服 包括液体气溶胶和固体颗粒 第1部分:通风和非通风“气密”（1型）和“非气密”（2型）化学防护服的性能要求

2003-04-25

Protective clothing against liquid and gaseous chemicals, including aerosols and solid particles - Part 2: Performance requirements for "gas-tight" (Type 1) chemical protective suits for emergency teams (ET).
防液体和气体化学品 包括气溶胶和固体颗粒的防护服.第2部分:“气密”（1型）应急小组（ET）化学防护服的性能要求

2002-09-30

Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges-One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
废物的特性描述 浸出 颗粒废料和污泥浸出的符合性试验

2002-10-15

Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solids ratio of 2 l/kg for materials with high solids content and with particle size below 4 mm (with or without size reduction)
废物浸出特性；颗粒物和污泥浸出的符合性试验.第1部分:液固比为2L/kg、粒径小于4mm（无或有粒径减小）的一阶段分批试验；德文版EN 12457-1:2002

2003-01-01

Characterization of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without of with size reduction).
废物的特性 浸出 颗粒废料和污泥浸出的符合性试验 第1部分:高固体含量和粒径小于4mm（不减小粒径）材料的液固比为2 l/kg的一阶段批量试验

2003-07-18

Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges-Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with a high solid content and with a particle size below 4 mm (without or with size reduction)
废物的特性描述 浸出 颗粒废料和污泥浸出的符合性试验

2002-10-15